Menu Board In Line Ceiling Mount Kit Back-to-back L/

Ideal Use Cases

The Mustang Professional MPCMD-M44V is intended for menu-board installations that call for an in-line ceiling mount with back-to-back display positioning. It accommodates 32- to 75-inch TVs and supports both landscape and portrait orientation. This flexibility is useful when a menu-board layout requires displays facing opposite directions or when screen orientation may vary across an installation. Compatibility is defined by a maximum 400 x 400 mm VESA pattern and a published 300 lb load rating. The mounting pattern, dimensions, and weight of the planned displays should therefore be checked against these limits before the mount is selected.

Why Choose This Model

The MPCMD-M44V combines broad display compatibility with multiple alignment adjustments. Its tilt range is +15 degrees to -5 degrees, while side-to-side roll adjustment spans plus or minus 3 degrees. These controls allow the mounted displays to be positioned more precisely after installation. Height can be adjusted in 1-inch increments, providing another way to refine the finished menu-board layout. The mount is constructed from aluminum and high-grade cold-rolled steel, then protected with a scratch-resistant epoxy powder-coat finish. These specified materials and finish make the model well suited to installations where the mounting hardware remains visible.

Installation and Integration

The mounting interface is compatible with 1.5-inch NPT thread, allowing the MPCMD-M44V to integrate with an appropriate threaded suspension arrangement. Drop length is selected from Mustang Professional MPE-Series or MPEA-Series options rather than being specified as a single fixed length. This enables the required suspension length to be chosen for the intended installation, followed by height adjustment in 1-inch increments. Before installation, verify that each planned display is within the stated 32- to 75-inch size range, uses a VESA pattern no larger than 400 x 400 mm, and keeps the planned load within the published 300 lb rating. Landscape or portrait orientation can then be selected according to the menu-board layout. The available roll and tilt adjustments provide final positioning once the displays and ceiling-mount components are assembled.

Performance Highlights

The MPCMD-M44V focuses on load support, positioning flexibility, and alignment. Its 300 lb load rating supports the specified display application, while compatibility with TVs from 32 to 75 inches covers a substantial range of menu-board screen sizes. The +15-degree to -5-degree tilt range allows the viewing angle to be adjusted, and plus or minus 3 degrees of roll provides side-to-side correction. Height adjustment in 1-inch increments helps establish consistent display placement. Landscape and portrait compatibility also allows the mount to adapt to horizontal or vertical content layouts without requiring a different orientation-specific model.

What Makes It Different

This model brings together an in-line, back-to-back ceiling configuration, dual-orientation support, and a maximum 400 x 400 mm VESA interface. Its adjustment options address several parts of the installation: drop length is selected through the MPE-Series or MPEA-Series, height is refined in 1-inch increments, roll is adjustable by plus or minus 3 degrees, and tilt ranges from +15 degrees to -5 degrees. The combination of aluminum and high-grade cold-rolled steel construction adds structural material appropriate to the published load rating, while the scratch-resistant epoxy powder coat protects the exterior finish.

Final Assessment

The Mustang Professional MPCMD-M44V is a purpose-specific choice for in-line, ceiling-mounted menu boards requiring back-to-back display placement. Its key selection criteria are straightforward: 32- to 75-inch TV compatibility, a maximum 400 x 400 mm VESA pattern, and a 300 lb load rating. It also offers landscape or portrait mounting, adjustable tilt and roll, 1-inch height increments, and compatibility with 1.5-inch NPT thread. When paired with a suitable drop length from the MPE-Series or MPEA-Series, it provides a configurable mounting platform built from aluminum and high-grade cold-rolled steel with a scratch-resistant epoxy powder-coat finish.