Menu Board Modular Wall Mount Kit Landscape 60-70in 800x400 200Lbs

The Mustang Professional MPWML-XU is a modular menu board wall mount kit for 60- to 70-inch TVs. It provides a 200 lb load rating and supports VESA mounting patterns up to 800 x 400 mm. While configured for landscape menu board applications, the supplied specifications also support portrait orientation. Positioning controls include +15°/-5° tilt, ±0.4-inch height adjustment, and lateral adjustment that varies with the installed screen. The mount places the display 2.2 inches from the wall and features high-grade cold rolled steel construction with a scratch-resistant epoxy powder coat finish.

Ideal Use Cases

The MPWML-XU is intended for menu board installations using televisions between 60 and 70 inches. Its landscape and portrait compatibility accommodates horizontal or vertical screen layouts without changing to a different mount model. The 200 lb load rating and 800 x 400 mm maximum VESA pattern establish clear compatibility limits for display selection.

This model can be installed over wood studs, concrete, cinder block, or metal studs. Metal-stud installations require the MPHT accessory. Its listed stud-spacing options make it suitable for projects using dual studs positioned 16, 20, or 24 inches on center, as well as triple studs positioned 16 inches on center.

Why Choose This Model

The MPWML-XU combines defined display compatibility with several mechanical positioning adjustments. The +15°/-5° tilt range allows the mounted screen angle to be changed, while ±0.4-inch height adjustment supports vertical alignment. Lateral adjustment is also available, although its usable range depends on the particular screen.

A specified depth of 2.2 inches from the wall gives installers and system planners a concrete measurement for the completed display position. High-grade cold rolled steel forms the mount structure, and the scratch-resistant epoxy powder coat provides the stated exterior finish. These details make the model straightforward to evaluate against a menu board project’s display size, weight, mounting pattern, wall construction, and alignment requirements.

Installation and Integration

Installation planning should begin by confirming that the television is within the supported 60- to 70-inch size range, does not exceed the 200 lb load rating, and uses a compatible VESA pattern within the stated 800 x 400 mm maximum. The selected landscape or portrait orientation can then be incorporated into the menu board layout.

For wood-stud construction, the mount supports dual-stud spacing at 16, 20, or 24 inches on center. It also supports triple-stud construction at 16 inches on center. Concrete and cinder block are listed mounting surfaces as well. When mounting to metal studs, the MPHT accessory is required.

After the display is mounted, the tilt can be set within its +15°/-5° range and the height adjusted by ±0.4 inch. Lateral positioning can be used according to the adjustment range available with the chosen screen. The finished installation positions the display 2.2 inches from the wall, allowing that spacing to be included in advance when planning the surrounding installation.

Performance Highlights

• Supports 60- to 70-inch televisions.
• Provides a 200 lb load rating.
• Accommodates VESA patterns up to 800 x 400 mm.
• Supports both landscape and portrait orientation.
• Offers +15°/-5° tilt adjustment.
• Includes ±0.4-inch height adjustment.
• Provides screen-dependent lateral adjustment.
• Positions the display 2.2 inches from the wall.
• Uses high-grade cold rolled steel with a scratch-resistant epoxy powder coat finish.

What Makes It Different

The defining feature set is the combination of menu board positioning controls and support for several listed wall constructions. Tilt, height, and lateral adjustment address different parts of display alignment: tilt changes the screen angle, height adjustment provides a specified ±0.4-inch vertical range, and lateral adjustment varies according to the installed television.

The mounting configuration also covers multiple stud layouts rather than a single spacing. Dual-stud installations can use 16-, 20-, or 24-inch on-center spacing, while triple-stud installations use 16-inch centers. Concrete and cinder block compatibility extend the listed surface options, and metal studs can be used when paired with the required MPHT accessory. Landscape and portrait compatibility further allows the same model to serve either supported orientation.

Final Assessment

The Mustang Professional MPWML-XU is a focused menu board mounting solution for 60- to 70-inch televisions that meet its 200 lb load rating and 800 x 400 mm maximum VESA specification. Its 2.2-inch wall depth, adjustable tilt, height adjustment, and screen-dependent lateral positioning provide clearly documented installation parameters. For projects using supported stud layouts, concrete, cinder block, or metal studs with the required MPHT accessory, it offers a precisely defined set of mounting and alignment capabilities.