Menu Board In Line Ceiling Mount Kit w/ (2) MPCMX86U -Need ext col

The Mustang Professional MPCM-2X86U is an in-line ceiling-mount kit for menu-board display installations. Configured with two MPCMX86U mounts, it accommodates 32-inch to 75-inch TVs in landscape or portrait orientation. The mount supports VESA patterns up to 800x672mm and has a listed load rating of 300 lbs. Its aluminum and high-grade cold-rolled steel construction is finished with a scratch-resistant epoxy powder coat.

Ideal Use Cases

This model is designed for in-line menu-board arrangements that place multiple displays in a coordinated ceiling-mounted layout. Its 32-inch to 75-inch display range makes it suitable for installations using medium or large TVs, while landscape and portrait compatibility supports horizontal menu layouts as well as vertically formatted content. The two-mount configuration is particularly relevant when a menu-board installation requires two displays positioned as part of the same suspended system.

Why Choose This Model

The MPCM-2X86U combines broad display compatibility with several mechanical adjustment points. Displays can be tilted from +15 degrees to -5 degrees, providing control over the viewing angle after mounting. Side-to-side roll adjustment of +/-3 degrees helps align the displays, while height adjustment in 1-inch increments supports consistent positioning. Maximum VESA compatibility of 800x672mm expands the range of display mounting patterns that can be accommodated.

The mount also supports either landscape or portrait installation without requiring the menu-board content strategy to be limited to one orientation. This flexibility is useful when display orientation may vary by application or when a future layout change calls for a different presentation format.

Installation and Integration

The mounting interface is compatible with 1.5-inch NPT threads. Drop length is selected from Mustang Professional MPE-Series or MPEA-Series options, allowing the required suspension length to be chosen for the installation. The supplied product title identifies an extension column as needed, but no specific extension-column model or length is provided. That component should therefore be selected according to the required ceiling-to-display drop.

During planning, match each display to the supported 32-inch to 75-inch size range and confirm that its mounting pattern does not exceed 800x672mm. The completed configuration should also remain within the listed 300 lb load rating. Once installed, the 1-inch height increments, tilt range, and roll adjustment provide the available controls for positioning and aligning the menu-board displays.

Performance Highlights

• Supports 32-inch to 75-inch TVs.
• Listed load rating of 300 lbs.
• Maximum VESA pattern of 800x672mm.
• Landscape or portrait display orientation.
• +15-degree/-5-degree tilt adjustment.
• +/-3-degree side-to-side roll adjustment.
• Height adjustment in 1-inch increments.
• Compatible with 1.5-inch NPT threaded mounting interfaces.

These specifications give installers defined parameters for display selection, load planning, mounting-pattern compatibility, and final alignment. The available angular and height adjustments are especially relevant when two displays must be positioned consistently within an in-line menu-board arrangement.

What Makes It Different

The MPCM-2X86U brings two menu-board mounts together in an in-line ceiling-mount configuration while retaining individual positioning capabilities. Rather than limiting the installation to a single display orientation, it works with both landscape and portrait layouts. Its combination of an 800x672mm maximum VESA pattern, 32-inch to 75-inch display compatibility, and a 300 lb load rating addresses a wide range of specified menu-board display requirements.

Material construction is also clearly defined: aluminum and high-grade cold-rolled steel are paired with a scratch-resistant epoxy powder-coat finish. The compatible MPE-Series and MPEA-Series drop-length options allow the suspension component to be selected separately for the installation requirements.

Final Assessment

The Mustang Professional MPCM-2X86U is a focused mounting solution for two-display, in-line ceiling menu boards. It offers landscape or portrait positioning, substantial VESA compatibility, a stated 300 lb load rating, and practical tilt, roll, and incremental height adjustments. It is best matched to installations using 32-inch to 75-inch TVs and a compatible 1.5-inch NPT extension-column arrangement. Final configuration requires selection of the appropriate MPE-Series or MPEA-Series drop length.