Menu Board Modular Wall Mount Kit Landscape 48-55in 800x400 200Lb

The Mustang Professional MPWML-LU is a modular menu board wall-mount kit for 48- to 55-inch TVs. It has a stated load rating of 200 lb and accepts VESA mounting patterns up to 800 x 400 mm. The mount supports landscape or portrait orientation, allowing the display position to match horizontal menu content or a vertically arranged presentation. Its cold-rolled steel construction, adjustable positioning, and broad mounting-surface compatibility provide a practical foundation for a compatible menu board installation.

Ideal Use Cases

This model is intended for menu board projects built around 48- to 55-inch televisions. It is suited to installations where the display must remain close to the wall while still offering tilt and alignment adjustments. Landscape orientation accommodates wide-format menu content, while portrait orientation supports vertically organized material. The 200 lb load rating also makes the mount relevant when the selected display falls within the supported size, weight, and VESA requirements.

With a depth of 2.2 inches from the wall, the MPWML-LU provides a comparatively compact installed profile. Its positioning features are useful when display height, viewing angle, and alignment need to be refined during integration.

Why Choose This Model

The MPWML-LU brings its key compatibility requirements together in one defined configuration: 48- to 55-inch display support, a maximum 200 lb load rating, and VESA compatibility through 800 x 400 mm. It also provides a +15-degree/-5-degree tilt range, giving the installer control over the screen angle after mounting.

Height adjustment of plus or minus 0.4 inch provides a measured range for correcting small vertical differences. Lateral adjustment is also available, although the available amount varies with the screen. That screen-dependent range should be considered when planning final display placement. The ability to select landscape or portrait orientation adds another layer of installation flexibility without changing to a different model.

Installation and Integration

The mount can be installed on wood stud, concrete, or cinder block mounting surfaces. Metal-stud installation is also supported when the required MPHT accessory is used. Supported framing layouts include dual studs spaced 16, 20, or 24 inches on center, as well as triple studs spaced 16 inches on center. These stated options allow the installer to match the mount to several common wall constructions and framing arrangements.

Before installation, verify that the television measures between 48 and 55 inches, weighs no more than 200 lb, and uses a VESA pattern no larger than 800 x 400 mm. The intended orientation, mounting surface, and available stud spacing should also be confirmed. For a metal-stud wall, the MPHT accessory must be included in the installation plan.

After the mounting location is established, the tilt range, height adjustment, and screen-dependent lateral adjustment can be used to refine positioning. The specified 2.2-inch wall depth should also be considered when coordinating the display with its surrounding installation.

Performance Highlights

• Supports 48- to 55-inch TVs with a maximum load rating of 200 lb.
• Accepts VESA mounting patterns up to 800 x 400 mm.
• Provides landscape or portrait display orientation.
• Offers +15-degree/-5-degree tilt for viewing-angle adjustment.
• Includes plus or minus 0.4-inch height adjustment.
• Provides lateral adjustment, with the available range varying by screen.
• Positions the display 2.2 inches from the wall.

The mount is constructed from high-grade cold-rolled steel and finished with a scratch-resistant epoxy powder coat. These specified materials address both the structural role of the mount and the protection of its finished surfaces.

What Makes It Different

The defining feature set is the combination of modular menu board use, two supported display orientations, and several adjustment points. Tilt addresses the screen angle, height adjustment allows limited vertical correction, and lateral adjustment assists with horizontal positioning within the range available for the selected screen.

The mounting provisions are equally specific. Dual-stud layouts are supported at three stated spacings, while a triple-stud layout is supported at 16 inches on center. Compatibility with wood stud, concrete, cinder block, and accessory-assisted metal-stud installations gives the MPWML-LU clearly documented options for different wall types. Its 800 x 400 mm maximum VESA pattern further defines which displays can be integrated.

Final Assessment

The Mustang Professional MPWML-LU is a focused choice for mounting a compatible 48- to 55-inch menu board display. Its 200 lb capacity, 800 x 400 mm maximum VESA support, landscape-or-portrait configuration, adjustable tilt, and 2.2-inch wall depth provide the essential specifications needed for installation planning. High-grade cold-rolled steel and a scratch-resistant epoxy powder-coat finish complete a mount designed around documented compatibility and controlled display positioning.