Menu Board In Line Ceiling Mount Kit Back-to-back Kit w/ (2) MPCMDX86U

The Mustang Professional MPCMD-2X86U is an in-line ceiling menu board mount kit designed for back-to-back display arrangements. It supports 32- to 75-inch TVs, landscape or portrait orientation, and VESA mounting patterns up to 800 x 672 mm. A 500 lb load rating, aluminum and high-grade cold-rolled steel construction, and a scratch-resistant epoxy powder-coat finish define the core mechanical specification.

Ideal Use Cases

This model is intended for ceiling-mounted menu board installations that require displays positioned in line or back to back. Its 32- to 75-inch display range accommodates a broad selection of TV sizes, while portrait and landscape compatibility allows the screen orientation to follow the content format. The back-to-back kit configuration is particularly relevant when information must face two directions from a shared ceiling-mounted arrangement. Applications can be planned around the stated 500 lb total load rating and maximum 800 x 672 mm VESA pattern.

Why Choose This Model

The MPCMD-2X86U combines a substantial load rating with several alignment controls. The mount provides tilt adjustment from +15 degrees to -5 degrees and side-to-side roll adjustment of +/-3 degrees. Height can be adjusted in 1-inch increments, giving installers defined steps for positioning displays within the menu board layout. Compatibility with both landscape and portrait mounting also provides flexibility when displays or content requirements differ between installations.

Installation and Integration

The mounting interface is compatible with 1.5-inch NPT thread, allowing the kit to be incorporated into a ceiling-mount system built around that connection standard. Drop length is selected from the Mustang MPE-Series or MPEA-Series, so the vertical placement can be specified according to the installation. Display compatibility should be verified against three provided limits: a screen size from 32 to 75 inches, a VESA pattern no larger than 800 x 672 mm, and the 500 lb load rating. Once mounted, 1-inch height increments support vertical alignment, while tilt and roll adjustments provide additional control over screen position. Orientation can be selected as either landscape or portrait.

Performance Highlights

The adjustment range is designed around the positioning requirements of a multi-display menu board. Upward tilt reaches +15 degrees, downward tilt reaches -5 degrees, and roll can be adjusted by three degrees in either direction. These controls allow the display angle and side-to-side level to be refined after the main ceiling position has been established. The 500 lb load rating and 800 x 672 mm maximum VESA pattern extend compatibility across the stated 32- to 75-inch TV range, subject to the specifications of each display used.

What Makes It Different

The defining feature of this listing is its in-line, back-to-back menu board configuration. Instead of describing a general-purpose single-display wall mount, the MPCMD-2X86U is identified specifically as a ceiling-mounted menu board solution. It combines support for two display orientations with incremental height adjustment, bidirectional roll, and asymmetric tilt. Its aluminum and high-grade cold-rolled steel construction is finished with a scratch-resistant epoxy powder coat. The 1.5-inch NPT-compatible interface and selectable MPE-Series or MPEA-Series drop length establish the stated integration path for the ceiling assembly.

Final Assessment

The Mustang Professional MPCMD-2X86U brings together the essential specifications for an adjustable back-to-back ceiling menu board installation: support for 32- to 75-inch TVs, a 500 lb load rating, VESA compatibility up to 800 x 672 mm, and landscape or portrait positioning. Its +15/-5-degree tilt range, +/-3-degree roll, 1-inch height increments, and 1.5-inch NPT compatibility provide clearly defined installation parameters. Confirm the displays, VESA patterns, combined load, orientation, and required MPE-Series or MPEA-Series drop length when planning the complete installation.