Menu Board In Line Ceiling Mount Kit Back-to-back Kit w/ (2) MPCMDM44V

The Mustang Professional MPCMD-2M44V is an in-line ceiling menu board mount kit designed around a back-to-back configuration. The kit is identified as including two MPCMDM44V units and accommodates 32-inch to 75-inch TVs. Its published specifications combine a 500 lb load rating, VESA compatibility up to 400 x 400 mm, portrait or landscape orientation, adjustable tilt and roll, and selectable ceiling-drop integration. Aluminum and high-grade cold rolled steel construction is finished with a scratch-resistant epoxy powder coat.

Ideal Use Cases

This kit is suited to menu board layouts that need displays facing opposite directions from an in-line ceiling-mounted arrangement. The broad listed screen range supports projects using 32-inch through 75-inch TVs, while dual-orientation support makes it useful for wide landscape menus or vertically organized portrait content. It is also appropriate where the chosen displays use mounting patterns at or below the stated 400 x 400 mm maximum. The published 500 lb rating should be evaluated together with the complete planned mounted assembly.

Why Choose This Model

The MPCMD-2M44V puts the primary mechanical requirements for a two-sided menu board installation into one specified configuration. It allows landscape or portrait positioning without changing to a different model. Height can be set in 1-inch increments, giving the installer a defined way to coordinate display elevation. The mount also provides +15°/-5° tilt and +/-3° side-to-side roll, so the installed screens can be positioned within the stated adjustment ranges. Its aluminum and high-grade cold rolled steel construction addresses the supporting structure, while the scratch-resistant epoxy powder coat supplies the listed protective finish.

Installation and Integration

The mounting interface is compatible with 1.5-inch NPT thread. Drop length is not fixed in the supplied data; it is selected from the MPE-Series or MPEA-Series. This allows the ceiling-drop choice to be matched to the project while retaining the MPCMD-2M44V mount configuration. Before integration, confirm that each selected TV falls within the 32-inch to 75-inch range and does not exceed the 400 x 400 mm maximum VESA pattern. The listed load rating is 500 lbs; the product data does not further divide that rating by display or component. Once the compatible drop solution and screens are established, the assembly offers 1-inch height increments, the listed tilt range, and side-to-side roll adjustment for final positioning.

Performance Highlights

The core performance of this model is its combination of range, load rating, orientation choice, and mechanical adjustment. It covers TVs from 32 inches through 75 inches and supports VESA patterns up to 400 x 400 mm. Landscape and portrait compatibility lets the physical installation follow the intended menu format. A +15°/-5° tilt range changes the viewing angle, while +/-3° roll provides side-to-side adjustment. The 1-inch height increments make vertical changes discrete and repeatable. Together, these specifications define how the mount can be fitted and aligned without adding unsupported assumptions about the connected displays.

What Makes It Different

What distinguishes this SKU is the back-to-back kit format paired with two MPCMDM44V units. Rather than describing a single display position, the product title identifies an in-line ceiling mount kit intended for opposing display placement. That configuration is combined with support for both orientations, the stated TV-size range, a 400 x 400 mm maximum VESA pattern, and a 1.5-inch NPT-compatible interface. The choice of aluminum and high-grade cold rolled steel, plus the scratch-resistant epoxy powder-coat finish, completes a specification set centered on mounting capacity and installer-controlled positioning.

Final Assessment

The MPCMD-2M44V is a focused choice for a back-to-back ceiling-mounted menu board layout when the planned TVs and ceiling-drop components match its published limits. Its strongest points are the two-unit kit configuration, 32-inch to 75-inch display range, 500 lb load rating, dual-orientation support, 400 x 400 mm maximum VESA compatibility, and practical tilt, roll, and height adjustments. Selection should be based on those stated limits, along with an MPE-Series or MPEA-Series drop length appropriate to the installation.