BalanceBox over the whiteboard floor support. Balanceboc p/n: 481A61001

Ideal Use Cases

The BalanceBox over-the-whiteboard floor support is designed for installations that already have a whiteboard in place and need to accommodate a BalanceBox 400-series wall mount. It provides a practical installation route when taking down the existing whiteboard is not desirable. This focused design makes it suitable for rooms where the whiteboard must remain part of the installed environment while a compatible BalanceBox mounting system is added.

The floor support is specifically intended for use with BalanceBox 400-series wall mounts. Its stated load capacity is 225 kg, or 495 lbs. Because compatibility is defined around that mount series, it is best suited to projects in which the BalanceBox mounting hardware has already been selected or is being specified as part of the installation.

Why Choose This Model

The main reason to choose this model is its ability to support a BalanceBox installation without requiring removal of the existing whiteboard. That can simplify the physical preparation of the installation area and preserve the current whiteboard arrangement. Instead of treating the whiteboard as an obstacle that must be removed, this floor-support configuration is designed to work over it.

The product has a clearly stated purpose rather than serving as a general-purpose floor mount. It works with BalanceBox 400-series wall mounts and carries loads up to 225 kg or 495 lbs. These two verified details provide a straightforward basis for determining whether the support fits the intended project.

Installation and Integration

This model integrates with a BalanceBox 400-series wall mount as an over-the-whiteboard floor support. During project planning, confirm that the associated mount belongs to the specified 400 series and that the required load does not exceed the published 225 kg or 495 lb capacity. The existing whiteboard can remain in place, which is the defining installation benefit described for this product.

The floor-support format offers an alternative installation approach for sites where removing the whiteboard would add unnecessary work. Its role is limited and specific: it provides floor support for the compatible BalanceBox mount while allowing the installation to be arranged around the existing board. No other mounting compatibility, included hardware, dimensions, or setup requirements are specified in the supplied product data.

Performance Highlights

• Designed for BalanceBox 400-series wall mounts.
• Installs without requiring the existing whiteboard to be taken down.
• Rated load capacity of 225 kg or 495 lbs.
• Over-the-whiteboard floor-support configuration.
• BalanceBox part number 481A61001.
• Product SKU VB-BOW-001.

The 225 kg or 495 lb load rating is the principal published performance specification. It should be used alongside the stated BalanceBox 400-series compatibility when evaluating the support for a planned installation.

What Makes It Different

What distinguishes this floor support is the installation problem it addresses. Conventional project preparation may involve taking down an existing whiteboard before compatible mounting equipment can be positioned. This model is designed to avoid that step by supporting the BalanceBox installation over the whiteboard.

Its value therefore comes from the combination of defined 400-series compatibility, an over-the-whiteboard design, and a substantial published load capacity. It is not presented as a universal mounting product. Instead, it is a purpose-built component for a specific BalanceBox configuration, making selection clearer when those exact requirements apply.

Final Assessment

The BalanceBox over-the-whiteboard floor support is a targeted installation component for BalanceBox 400-series wall mounts. It is most relevant when an existing whiteboard needs to remain installed and the project requires a floor-supported mounting arrangement. With a rated capacity of 225 kg or 495 lbs, it provides a concrete load specification for planning.

Choose this model when the installation calls for BalanceBox 400-series compatibility, retention of the existing whiteboard, and the over-the-whiteboard floor-support format. Reference SKU VB-BOW-001 and BalanceBox part number 481A61001 when confirming the required product.