SUMMER SPECIAL — shop now
SHIPPING OPTIONS shown at checkout
Call us: (800) 581-6868
WARRANTY TERMS vary by product
OPEN BOX DEALS - savings vary by item
PAYMENT OPTIONS shown at checkout
GET $10 OFF $100+ — join our email list
Your Cart
Your cart is empty
Looks like you haven't added anything yet.
Product Overview
The Peerless-AV SmartMount SP850-UNL supports 32- to 80-inch flat-panel displays up to 150 lb. Its black pull-out pivot design sits 2.
Shipping charges and warranty coverage vary by product and order. Review the applicable terms before purchase.
Available to order; contact us to confirm lead time
Rates and available methods are shown at checkout
Key Features
The Peerless-AV SmartMount SP850-UNL combines the low-profile placement of a wall mount with the movement of a pivot arm. Designed for 32-inch to 80-inch flat-panel displays weighing up to 150 lb, it closes to 2.73 inches from the wall and extends to 11.18 inches. The display can pivot up to 45 degrees, while built-in cable management helps conceal components and cords.
The SP850-UNL is well suited to indoor installations where a display must sit close to the wall but still move outward for positioning. Peerless-AV identifies it for recessed-wall installations, custom-framed displays, and displays that must be aligned within a multi-display wall. Its combination of wall mounting, extension, and pivot movement also addresses installations where a conventional fixed mount would not provide sufficient access or viewing adjustment.
When closed, the SP850-UNL functions as a flat or tilting wall mount. Its 2.73-inch minimum depth keeps the display near the mounting surface, while the sturdy arm construction allows it to glide outward to a maximum depth of 11.18 inches. Once extended, the display can pivot up to 45 degrees. This integrated design provides both a low-profile closed position and pull-out movement without requiring a separate pivot arm.
The mount is also identified as tamper resistant and theft resistant. A lock, key installation tool, and locking tab are included, supporting installations where display security is an important consideration.
The mount supports wall, wood-stud, concrete, and cinder-block mounting surfaces. Assembly is required. The wall-mount assembly measures 24.38 inches wide, 16.78 inches high, and 11.18 inches deep, with an approximate weight of 30.40 lb. Its black, powder-coated TGIC polyester finish provides a consistent appearance for indoor display installations.
The package contains the wall-mount assembly, lock, key installation tool, locking tab, cable-management sleeve, fastener pack, and universal adaptor plate. The supplied fastener pack includes display attachment for VESA 100 x 100 mm and 200 x 100 mm patterns. The source identifies the mount as VESA compatible while listing its mount-pattern compatibility type as dedicated, so display and mounting-pattern compatibility should be confirmed for the intended installation.
The SP850-UNL supports flat-panel displays from 32 inches through 80 inches and has a maximum load capacity of 150 lb. Its adjustable depth ranges from 2.73 inches to 11.18 inches, providing 8.45 inches of travel between the minimum and maximum positions. Maximum swivel or pivot movement is 45 degrees, and the listed minimum tilt angle is 0 degrees.
Built-in cable management routes cords within the installation and helps keep them concealed as the display moves. The pull-out arm is designed to glide the display smoothly from its closed wall position to its extended position.
The defining feature of this model is its combination of wall-mount placement and pivot-arm movement. It can remain close to the wall like a flat or tilting mount, then extend more than 11 inches when pivot movement is needed. That configuration directly supports recessed displays, custom frames, and multi-display walls where alignment and controlled extension matter.
The SP850-UNL is made in the United States and is listed as TAA compliant, UL listed, VESA compliant, and compliant with the Restriction of Hazardous Substances standard. It carries a five-year limited warranty.
The Peerless-AV SmartMount SP850-UNL is a focused solution for large indoor flat-panel installations requiring a 150 lb load rating, a low-profile closed position, pull-out access, and up to 45 degrees of pivot movement. Its built-in cable management, included universal adaptor plate, security-oriented construction, and support for several wall-surface types make it particularly relevant for recessed, framed, or multi-display applications.
No approved reviews yet for this product.
No approved reviews are available yet for this product.
Checking whether your account is eligible to review this product...
Coverage varies; confirm the terms before purchase
30-day window; conditions and exclusions apply
Condition and specifications are shown per listing