18" Jumbo 2000 TV Mount Wall Arm, Single Arm

The Peerless-AV WMJ018 is a single wall mounting arm with an 18-inch reach, supplied separately for use with JUMBO TV bracket systems. It is classified as an accessory for a mounting bracket rather than a complete display mount. The arm is black, wall mountable, and listed for loads from 125 lb minimum to 150 lb maximum. A 1 1/2-inch-11.5 NPT threaded fitting accepts the manufacturer’s flush mount tube or an extension column, giving the arm a defined connection point for compatible JUMBO installations.

Ideal Use Cases

This model fits installations that call for a wall-supported arm between a compatible JUMBO mount and a flush mount tube or extension column. Listed compatibility includes the JM2630, JM2640, and DJM2640 JUMBO mounts. The 18-inch reach makes it appropriate when that stated extension is part of the planned mounting layout. Because the supported device type is a mounting bracket, the WMJ018 should be selected as one component within a compatible mount configuration, not as a standalone bracket for direct attachment to a television.

Why Choose This Model

The WMJ018 provides the single-arm component used with Jumbo 2 wall mounts in a separately available format. This supports projects that require the wall arm to be sourced separately while retaining the identified JUMBO mount compatibility. Its published capacity figures clearly define the intended load range: 125 lb minimum and 150 lb maximum. The black finish matches the listed color family, and the approximate 9.40 lb product weight gives installers a concrete figure for planning handling and assembly.

Installation and Integration

Assembly is required. The package contains the wall arm, three wood screws, and plastic sleeves identified for attachment to a wood stud wall. The arm mounts to a wall and incorporates a 1 1/2-inch-11.5 NPT threaded fitting. That fitting is specified to accept a Peerless-AV flush mount tube or an extension column. Before integration, confirm that the selected mount is one of the listed compatible models and that the complete configuration aligns with the published 125-to-150 lb load range. The supplied fasteners are described specifically for wood-stud attachment; no other mounting hardware or wall construction is stated in the product data.

Performance Highlights

This accessory centers on three published performance details: an 18-inch reach, compatibility with defined JUMBO mounts, and a maximum load capacity of 150 lb. The minimum load capacity is listed at 125 lb. These values help narrow model selection when matching the arm to a mounting plan. Its wall-mountable form factor and NPT connection establish how it integrates physically, while the single-arm configuration distinguishes it from the separately referenced double-wall-arm format.

What Makes It Different

Unlike a complete wall-mount kit, the WMJ018 is identified as an arm and wall plate accessory for a mounting bracket. Its role is specific: it supplies the wall arm portion of a compatible JUMBO assembly. The included three wood screws and plastic sleeves address the stated wood-stud attachment method, while the threaded fitting accommodates either a flush mount tube or extension column. The product is made in the United States, is TAA compliant, and is listed for Restriction of Hazardous Substances environmental compliance. Its stated certifications and standards are RoHS and TAA.

Final Assessment

For projects built around the JM2630, JM2640, or DJM2640, the WMJ018 offers a clearly specified single wall arm with an 18-inch reach and black finish. Its listed 125-to-150 lb load range, 1 1/2-inch-11.5 NPT fitting, approximate 9.40 lb weight, and included wood-stud attachment hardware provide the key facts needed for selection. It is best evaluated as a compatible JUMBO mounting accessory that requires assembly and integration with the appropriate bracket, tube, or extension column.