SUMMER SPECIAL — shop now
SHIPPING OPTIONS shown at checkout
Call us: (800) 581-6868
WARRANTY TERMS vary by product
OPEN BOX DEALS - savings vary by item
PAYMENT OPTIONS shown at checkout
GET $10 OFF $100+ — join our email list
Your Cart
Your cart is empty
Looks like you haven't added anything yet.
Product Overview
Mustang Professional MPC-L75U-36 ceiling display mount for 37- to 75-inch TVs. Rated for up to 200 lb and VESA patterns through 723 x 501 mm, it provides up to 20 degrees of continuous tilt, 360-degree rotation, and cable routing through a 1.
Shipping charges and warranty coverage vary by product and order. Review the applicable terms before purchase.
Available to order; contact us to confirm lead time
Rates and available methods are shown at checkout
Key Features
The Mustang Professional MPC-L75U-36 is a ceiling display mount configured for 37- to 75-inch TVs. It supports displays weighing up to 200 lb and accepts mounting patterns up to 723 x 501 mm. For positioning, the assembly provides up to 20 degrees of continuous tilt and 360 degrees of rotation. Its fixed-extension design also routes cables through a 1.5-inch-diameter extension column, concentrating display support, positioning, and cable management in one ceiling-mount system.
This model is suited to ceiling-mounted installations that need to accommodate a television between 37 and 75 inches while retaining substantial positioning flexibility. The 360-degree rotation is useful when a display must face a specific viewing direction, while the continuous tilt range allows up to 20 degrees of vertical adjustment. It is also appropriate when the mounting location benefits from routing cables through the extension column instead of leaving them outside the column. Display compatibility must remain within the stated size, weight, and mounting-pattern limits.
The MPC-L75U-36 combines a 200 lb load rating with support for hole patterns as large as 723 mm wide by 501 mm high. That universal mounting range accommodates any hole pattern within those maximum dimensions, including patterns up to 28.5 inches by 19.8 inches in height. Its positioning system adds both continuous tilt and complete rotation, providing more adjustment than a ceiling mount limited to a single fixed viewing angle. The listed kit configuration identifies the MPCL75U, CA2, and MPE3 components.
Installation is supported by a pre-assembled securing screw designed to make setup faster and easier. A pre-sorted hardware pack simplifies component selection, and installation hardware for wood studs or concrete surfaces is included. Cables can be routed through the 1.5-inch-diameter extension column as part of the installation. Standard fixed-extension drop lengths are available in 2-foot and 3-foot options. Compatibility checks should account for the television’s screen size, total weight, and mounting-hole pattern: the display must fall within the 37- to 75-inch range, weigh no more than 200 lb, and use a hole pattern no larger than 723 x 501 mm.
The defining performance features are its positioning range and display capacity. Up to 20 degrees of continuous tilt allows the viewing angle to be adjusted without relying on a single preset tilt position. The 360-degree rotation provides full directional positioning around the ceiling-mount assembly. At the same time, the 200 lb load rating supports compatible displays across the specified 37- to 75-inch range. The maximum 723 x 501 mm VESA pattern gives the mount broad hole-pattern compatibility while establishing a clear fit limit for display selection.
This model brings together five specific installation capabilities: support for televisions up to 75 inches, a 200 lb load rating, universal hole-pattern compatibility within the stated dimensions, multi-angle positioning, and through-column cable routing. The included, pre-sorted installation hardware addresses both wood-stud and concrete mounting surfaces. The pre-assembled securing screw further reduces component preparation during setup. These details distinguish the MPC-L75U-36 as a complete ceiling-mount configuration rather than a basic fixed bracket without rotational positioning or integrated cable routing.
The Mustang Professional MPC-L75U-36 is a strong match when a ceiling-mounted television requires up to 20 degrees of continuous tilt, 360-degree rotation, and support for as much as 200 lb. Its 37- to 75-inch display range, 723 x 501 mm maximum mounting pattern, 1.5-inch extension-column cable path, and included installation hardware provide clear criteria for planning an installation. Confirm the display and mounting surface against those specifications before selecting this configuration.
No approved reviews yet for this product.
No approved reviews are available yet for this product.
Checking whether your account is eligible to review this product...
Coverage varies; confirm the terms before purchase
30-day window; conditions and exclusions apply
Condition and specifications are shown per listing