Mustang Pro Ceiling Mount Kit w/ MPCM22V CA1C; MPEA23

Ideal Use Cases

The Mustang Professional MPC-M22V-36A is intended for ceiling-mounted positioning of 13-inch through 46-inch LCD and plasma televisions. It is a practical match when a compatible display needs to be suspended rather than placed on furniture or attached directly to a wall. The listed 80 lb load rating and maximum 200 x 200 mm VESA pattern define its core compatibility boundaries. Before selection, compare both figures with the exact display; screen size alone does not establish compatibility. Applications that benefit from adjustable viewing direction can also use the mount’s continuous tilt and full rotation to orient the screen after it is suspended.

Why Choose This Model

This model brings positioning, cable routing, and incremental drop adjustment into one ceiling-mount configuration. It provides up to 20 degrees of continuous tilt, so the display angle can be changed within that range instead of being limited to a single fixed position. Its 360-degree rotation supports broad directional alignment around the extension column. The product data also specifies one-inch incremental drop-length adjustment. These capabilities make the MPC-M22V-36A especially relevant when the final screen height and direction need to be set around the installation location while remaining within the stated limits.

Installation and Integration

Installation planning should begin with three checks: display weight must not exceed 80 lb, the mounting interface must be no larger than 200 x 200 mm VESA, and the television must fall within the stated 13- to 46-inch LCD or plasma range. The listed kit configuration is MPCM22V CA1C; MPEA23, while the complete model and MPN are MPC-M22V-36A. Height is set in one-inch increments. The source data identifies 24- to 36-inch and 36- to 60-inch drop lengths as standard kit ranges. Cable routing is integrated through the 1.5-inch-diameter extension column, allowing compatible display cables to pass through the column rather than remain entirely outside it. A pre-assembled securing screw is part of the installation design.

Performance Highlights

The mount’s performance is defined by mechanical capacity and positioning range. It supports displays weighing up to 80 lb and accepts VESA patterns up to 200 x 200 mm. Once installed with a compatible television, it offers up to 20 degrees of continuous tilt and 360 degrees of rotation. These two adjustments serve different purposes: tilt changes the vertical viewing angle, while rotation changes the direction the display faces around the column. The one-inch drop adjustment controls suspended height. Together, these specifications provide three distinct setup variables: height, tilt, and rotation, without extending compatibility beyond the documented screen-size, weight, and VESA limits.

What Makes It Different

The defining characteristic is the way the listed features work together. The ceiling format removes the need to position the display on furniture or directly against a wall. The extension column provides incremental height adjustment and a 1.5-inch internal cable path, while the mount interface supplies continuous tilt and complete rotation around the column. The pre-assembled securing screw addresses the securing step during installation. When comparing this model with another mount, consider the full set of constraints: 13- to 46-inch LCD and plasma support, an 80 lb load rating, a 200 x 200 mm maximum VESA pattern, the applicable drop-length range, 20-degree tilt, and 360-degree rotation. Matching screen size alone does not confirm that another mount has the same capacity or positioning range.

Final Assessment

The MPC-M22V-36A is a focused ceiling display mount for compatible LCD and plasma televisions. Its strongest fit is a display within the 13- to 46-inch range, at or below 80 lb, and using a VESA mounting pattern no larger than 200 x 200 mm. Within those boundaries, it offers control over suspended height, viewing angle, and facing direction, plus through-column cable routing. The one-inch drop increments, up to 20 degrees of continuous tilt, 360-degree rotation, and pre-assembled securing screw are the specifications that should drive the purchase decision. Confirm the display’s exact weight and VESA pattern, then match the required drop range to the listed kit configuration before installation.