Mustang Pro Articulating mount for 37-75 flat panel screens

The Mustang Professional MPA-L64U is a full-motion articulating wall mount designed for flat-panel displays from 37 to 75 inches. It supports displays weighing up to 150 lb (68 kg) and accommodates mounting patterns from 300 x 200 mm to 600 x 400 mm. Its aluminum and high-grade cold-rolled steel construction combines a 3.5-inch wall depth with extension up to 27 inches, providing substantial positioning range in a black-finished assembly.

Ideal Use Cases

This model fits installations that require one flat panel to serve more than one viewing position. Its 90-degree pivot and 27-inch maximum extension allow the display to move away from the wall and turn toward another viewing area. When that reach is not needed, the stated depth from the wall is 3.5 inches.

The mount is also suitable when a display must be tilted above or below a direct sightline or when minor side-to-side adjustment is necessary. Its movement specifications make it an alternative to fixed and tilt-only mounting for compatible 37- to 75-inch screens.

Why Choose This Model

The MPA-L64U combines a 150 lb weight capacity with compatibility for mounting patterns ranging from 300 x 200 mm through 600 x 400 mm. That combination covers the stated range without sacrificing full-motion positioning. The mount provides 90 degrees of pivot, positive and negative 15 degrees of tilt, and 3 degrees of side-to-side roll.

Its aluminum and high-grade cold-rolled steel construction supports the specified load while keeping the mount itself at 22.7 lb (10.3 kg). The black finish gives the assembly a consistent, neutral appearance behind a flat-panel display. A five-year limited warranty is also specified for this model.

Installation and Integration

Before installation, confirm three display measurements against the mount specifications: screen size, total display weight, and mounting-hole pattern. The screen should fall within the recommended 37- to 75-inch range, weigh no more than 150 lb, and use a mounting pattern between 300 x 200 mm and 600 x 400 mm.

The mount weighs 22.7 lb before a display is attached, which should be included in installation planning. Its 3.5-inch depth and 27-inch maximum extension should also be considered when determining placement and the clearance needed for articulation. The available tilt, pivot, and roll adjustments can then be used to establish the required viewing position.

Performance Highlights

• Full-motion reach: Extension up to 27 inches (685.8 mm) provides room to bring a compatible display forward from the wall.
• Wide pivot range: A 90-degree pivot supports substantial left-to-right repositioning.
• Bidirectional tilt: Positive and negative 15-degree tilt permits adjustment in either vertical direction.
• Side-to-side adjustment: Three degrees of roll provides a limited range for lateral alignment.
• High load rating: The mount is rated for displays weighing up to 150 lb (68 kg).
• Pattern compatibility: Supported mounting patterns span from 300 x 200 mm to a maximum of 600 x 400 mm.

What Makes It Different

The defining feature of the MPA-L64U is the amount of positioning available within one wall-mount design. The 27-inch extension works with the 90-degree pivot to move and redirect a compatible display, while the positive and negative tilt range addresses vertical viewing angles. The 3-degree roll adds a smaller side-to-side adjustment dimension.

These movement ranges are paired with a 150 lb capacity and construction using aluminum and high-grade cold-rolled steel. The result is a mount specified for large flat panels while retaining articulation across pivot, tilt, roll, and extension.

Final Assessment

The Mustang Professional MPA-L64U is a strong match for installations requiring an articulating wall mount for a 37- to 75-inch flat panel. Its 150 lb capacity, 300 x 200 mm to 600 x 400 mm mounting-pattern range, 27-inch extension, and multiple adjustment axes provide clear compatibility and positioning criteria. The black finish, 22.7 lb product weight, specified metal construction, and five-year limited warranty complete its practical specification set.