Use this AV EV-115 Setup Guide and Buying Considerations article to decide whether the Epson LightScene EV-115 fits your room before a mount or cable is ordered. The supplied data identifies it as a black 2,200-lumen WXGA laser 3LCD projector. That is a useful start, but it does not answer the questions that make or break an installation: image size, throw geometry, ambient light, source connections, audio coverage, structural support, and service access. Several of those details are not listed, so they need confirmation on the product page or in current installation documentation. This guide turns the known facts into a practical review for AV buyers, installers, churches, schools, and conference room teams. It also explains where the two supplied Atlona transport kits may enter the signal-path discussion without assuming either one is compatible with the projector.
Top pick: The Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) is the lead recommendation because This is the only exact EV-115 projector in the supplied product set and the core product covered by the guide. Its known brightness, resolution, light source, and projection technology provide the starting point for room-fit planning.
Quick Picks
- Best overall: Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black)
- Best for teams assessing a TX/RX transport kit for HDMI or…: Atlona AT-OME-ST31A-KIT HDBaseT TX/RX for HDMI and USB-C
- Best for installers comparing a packaged HDMI and HDBaseT…: Atlona AT-AVA-EX70-2PS-KIT Avance 4K HDMI Transmitter and Receiver HDBaseT Extender Kit
Quick Comparison Table
| Feature | Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) | Atlona AT-OME-ST31A-KIT HDBaseT TX/RX for HDMI and USB-C | Atlona AT-AVA-EX70-2PS-KIT Avance 4K HDMI Transmitter and Receiver HDBaseT Extender Kit |
|---|---|---|---|
| Brightness | 2200 lumens | Not listed | Not listed |
| Resolution | WXGA | 4K | 4K |
| Best For | Buyers evaluating a 2,200-lumen WXGA laser 3LCD projector for a planned church, school, meeting, or managed visual-content installation. | Teams assessing a TX/RX transport kit for HDMI or USB-C sources, subject to full endpoint and EV-115 compatibility checks. | Installers comparing a packaged HDMI and HDBaseT transport option for a planned projector run, after confirming connections and supported formats. |
| Throw Type | Not listed | Not listed | Not listed |
| Audio | Not listed | Not listed | Not listed |
| Smart Features | Not listed | Not listed | Not listed |
| Price Range | $1,792.44 | $1,195.00 | $319.94 |
| Recommended Buyer | Buyers evaluating a 2,200-lumen WXGA laser 3LCD projector for a planned church, school, meeting, or managed visual-content installation. | Teams assessing a TX/RX transport kit for HDMI or USB-C sources, subject to full endpoint and EV-115 compatibility checks. | Installers comparing a packaged HDMI and HDBaseT transport option for a planned projector run, after confirming connections and supported formats. |
Product Images
Top Projector Products from AudioVideoNation
1. Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black)
Best fit: Buyers evaluating a 2,200-lumen WXGA laser 3LCD projector for a planned church, school, meeting, or managed visual-content installation.
Why it belongs here: This is the only exact EV-115 projector in the supplied product set and the core product covered by the guide. Its known brightness, resolution, light source, and projection technology provide the starting point for room-fit planning.
Store details: SKU EV-115 | In stock | $1,792.44
Key Features
- 2,200-lumen brightness listing
- WXGA resolution
- Laser light source
- 3LCD projection technology
- Black finish
Things to Consider
Throw type, audio, and smart features are Not listed. Verify lens geometry, inputs, accepted formats, dimensions, weight, mount requirements, permitted orientation, maintenance, warranty, and support before ordering.
2. Atlona AT-OME-ST31A-KIT HDBaseT TX/RX for HDMI and USB-C
Best fit: Teams assessing a TX/RX transport kit for HDMI or USB-C sources, subject to full endpoint and EV-115 compatibility checks.
Why it belongs here: It gives installers a supplied product to investigate when the source plan calls for a transmitter and receiver path. The listing identifies HDMI, USB-C, and HDBaseT, while the extracted facts list 4K resolution.
Store details: SKU AT-OME-ST31A-KIT | In stock | $1,195.00
Key Features
- 4K resolution listed in the supplied facts
- TX/RX kit format stated in the product name
- HDBaseT transport stated in the product name
- HDMI and USB-C named in the product listing
Things to Consider
The supplied data does not confirm EV-115 compatibility, cable reach, supported signal formats, HDCP or EDID behavior, audio routing, control, or power details. Verify and bench-test the complete path.
3. Atlona AT-AVA-EX70-2PS-KIT Avance 4K HDMI Transmitter and Receiver HDBaseT Extender Kit
Best fit: Installers comparing a packaged HDMI and HDBaseT transport option for a planned projector run, after confirming connections and supported formats.
Why it belongs here: This is another supplied transmitter and receiver option for buyers investigating a remote HDMI source route. Its extracted facts list 4K resolution, but selection still depends on the verified system design.
Store details: SKU AT-AVA-EX70-2PS-KIT | In stock | $319.94
Key Features
- 4K resolution listed in the supplied facts
- Transmitter and receiver kit format stated in the product name
- HDMI identified in the product listing
- HDBaseT extender format identified in the product listing
Things to Consider
Direct compatibility with the EV-115 is not established. Cable reach, cable requirements, format handling, HDCP or EDID behavior, audio, power, and control details are Not listed and need confirmation.
Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) vs Atlona AT-OME-ST31A-KIT HDBaseT TX/RX for HDMI and USB-C: Main Differences
- Choose Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) if Buyers evaluating a 2,200-lumen WXGA laser 3LCD projector for a planned church, school, meeting, or managed visual-content installation..
- Choose Atlona AT-OME-ST31A-KIT HDBaseT TX/RX for HDMI and USB-C if Teams assessing a TX/RX transport kit for HDMI or USB-C sources, subject to full endpoint and EV-115 compatibility checks..
- Choose Atlona AT-AVA-EX70-2PS-KIT Avance 4K HDMI Transmitter and Receiver HDBaseT Extender Kit if Installers comparing a packaged HDMI and HDBaseT transport option for a planned projector run, after confirming connections and supported formats..
What the Epson LightScene EV-115 is
The Epson LightScene EV-115 is listed as a 2,200-lumen WXGA laser 3LCD projector with a black finish. The supplied data does not list its throw type, audio capabilities, or smart functions. Those omissions matter. They prevent a buyer from determining image size, placement range, sound-system needs, or source workflow from the headline specifications alone.
In practical planning, a church, school, or workplace might evaluate the EV-115 for visual content in a welcome area, common space, meeting room, or other managed AV environment. These are possible applications, not confirmed fit claims. Each space has a different viewing distance, light level, mounting surface, and content requirement.
Start with the content. WXGA may suit one graphics package while another team needs finer text or a different canvas. Ask who will create the material, what source resolution they will use, and how closely people will view it. The EV-115 should be judged against that brief, not against the model name alone.
Epson EV-115 setup: check room and image fit first
Treat 2,200 lumens as one planning input. It does not establish a suitable image size or guarantee visibility in daylight. Ambient light, surface color, image dimensions, viewing angle, and content all affect what the audience sees.
Walk the room at the times it will be used. Note windows, overhead lighting, reflective finishes, and any lights aimed toward the image area. If those conditions change during the day, evaluate the brightest normal condition. Decide whether shades, lighting zones, or a different image location are part of the project.
Next, define the intended image width and height. Do not order mounting hardware until the installer can connect those dimensions to verified EV-115 throw data. Throw type is not listed in the supplied facts, and no throw ratio, zoom range, lens adjustment, or focus range is provided. Confirm each item on the current product page or installation documentation.
The display surface needs its own check. Record its material, color, flatness, texture, and usable dimensions. A wall that looks acceptable from across the room may show seams or surface defects once illuminated. If the project calls for a screen or purpose-built surface, include that cost and installation work in the scope.
Projector placement and mounting considerations
Placement begins with verified geometry. Mark the proposed image, projector position, cable route, power location, and service-access area on a drawing. Then compare the drawing with current EV-115 dimensions, weight, mounting points, permitted orientation, ventilation clearances, and throw information. None of those details appears in the supplied specifications.
Do not assume a generic projector mount will fit. Confirm the exact mounting method and every required bracket, adapter, fastener, and safety component. The supporting structure must suit the complete installed load, and any work above occupied areas should follow the applicable building requirements and the hardware manufacturer’s instructions.
Allow room for installation and later service. An attractive position can still be a poor choice if a technician cannot reach connections or remove the projector without disturbing finished surfaces. Keep cable bends, connectors, ventilation paths, and access panels clear.
Power and signal routes should be planned together. Document who supplies the electrical work, where low-voltage cable can run, and how exposed wiring will be protected or concealed. Test the proposed image and source path before final drilling whenever the room and project schedule allow it.
AV signal compatibility checklist for common environments
Build the signal path from end to end: source, adapters, switching or control equipment, transport hardware, projector connection, and audio destination. The supplied EV-115 data does not list its physical inputs, accepted signal formats, HDCP support, control connections, or network functions. Verify them before selecting cables or extenders.
Schools and conference rooms often need to account for several source types, while churches may route content from a fixed production position. List every required source and its output connection. Include any resident player, presentation computer, guest laptop, or control system that must participate. Then confirm which source resolutions the projector accepts and how the system will handle content created above WXGA.
The Atlona AT-OME-ST31A-KIT is identified in its product name as an HDBaseT TX/RX kit for HDMI and USB-C, and its supplied extracted facts list 4K resolution. The Atlona AT-AVA-EX70-2PS-KIT is identified as a 4K HDMI transmitter and receiver HDBaseT extender kit. Either may warrant investigation for a longer source route, but the provided data does not confirm compatibility with the EV-115.
A transport product’s 4K listing does not turn a WXGA projector into a 4K display. Confirm connectors at both ends, supported formats, cable type and reach, HDCP and EDID behavior, audio routing, control needs, and power requirements. Bench-test the complete chain with the real source before closing walls or ceilings.
Projector audio planning and room-size questions
Audio capability is not listed for the EV-115, so the sound plan remains unresolved. Do not assume that it has a suitable speaker or the audio connections your design needs. Check the current product documentation and plan external audio when the room requires intelligible speech, program sound, or music.
Ask five direct questions:
- What content needs sound?
- How many people and listening areas must be covered?
- Does the room already have loudspeakers, an amplifier, a mixer, or a DSP?
- Where will audio be separated from the video signal?
- Who controls volume and source selection?
Room size alone cannot answer whether the EV-115 or the audio system fits. For video, pair room dimensions with image size, viewing distance, ambient light, and surface conditions. For sound, evaluate listener locations, noise, coverage, and the existing audio chain. Keep those decisions coordinated, but do not treat projector brightness as an audio-coverage indicator.
Budget, support, and long-term maintenance
The supplied price for the Epson LightScene EV-115 is $1,792.44. That is a product price, not an installed-system total. Recheck the product page during purchasing, then add any required mount, structural hardware, surface treatment or screen, signal cabling, extender, electrical work, audio equipment, control components, labor, testing, and training.
The two transport kits should be budgeted only if the verified design needs one. Their supplied prices are $1,195.00 for the AT-OME-ST31A-KIT and $319.94 for the AT-AVA-EX70-2PS-KIT. They are different products, and the provided facts are too limited to choose between them on price alone.
Warranty terms, return conditions, support coverage, light-source life, service procedures, and maintenance intervals are not listed. Ask who handles installation support, what documentation is available, and how a failed component would be reached and serviced. The EV-115 is identified as a laser projector, but that fact does not supply a lifespan or eliminate cleaning and inspection requirements. Record the approved maintenance procedure, responsible team, and access method in the handoff package.
Buyer and installer approval checklist
Use this checklist before issuing a purchase order:
- Confirm the required content, image dimensions, viewing distances, operating hours, and normal ambient-light conditions.
- Record the known EV-115 facts: 2,200 lumens, WXGA resolution, laser light source, 3LCD technology, and black finish.
- Mark throw type, throw ratio, lens adjustment, dimensions, weight, mounting method, orientation limits, ventilation clearances, inputs, audio, control, and smart functions as items requiring verification.
- Inspect the proposed display surface and decide whether wall preparation or a screen belongs in the scope.
- Draw the full source-to-projector signal path. Include every adapter, switch, transport device, and audio connection.
- Compare the AT-OME-ST31A-KIT and AT-AVA-EX70-2PS-KIT only after confirming endpoint connections, cable route, supported formats, power, control, and audio needs.
- Confirm the supporting structure, electrical location, cable pathway, service access, and installation responsibilities.
- Build an installed budget rather than using the projector price as the project total.
- Verify current warranty, returns, support contacts, maintenance instructions, and documentation before approval.
- Bench-test the chosen source, transport path, projector, and audio route before permanent installation.
Finish with a written sign-off. The buyer, installer, content owner, facilities contact, and support team should agree on the image, control workflow, audio plan, access requirements, and items still awaiting confirmation. That short review catches expensive assumptions early.
Related AudioVideoNation Links
- Browse Projector at AudioVideoNation
- Epson LightScene EV-115 projector
- Atlona AT-OME-ST31A-KIT
- Atlona AT-AVA-EX70-2PS-KIT
FAQ
What brightness and resolution does the Epson EV-115 have?
The Epson EV-115 is listed at 2,200 lumens with WXGA resolution. The supplied data also identifies a laser light source and 3LCD projection technology, but it does not provide pixel dimensions or an on-screen brightness guarantee.
Does the Epson EV-115 include audio?
No audio capability is listed in the supplied EV-115 data. Verify the current product documentation and plan a separate audio route if the installation needs speech, music, or program sound.
What throw distance does the EV-115 require?
No throw type or throw-distance data is listed for the EV-115. Confirm the throw ratio, image-size range, lens adjustment, and mounting position before ordering hardware or drilling mounting points.
Will the supplied Atlona extender kits work with the EV-115?
Compatibility with the supplied Atlona kits is not confirmed by the product data. Match the projector and source connections, accepted formats, cable requirements, HDCP or EDID behavior, power, audio, and control needs before choosing a kit.
Is the EV-115 suitable for a large or brightly lit room?
The supplied data is not enough to rate the EV-115 for a particular room size or light level. Compare its 2,200-lumen listing with the required image size, surface, viewing distance, content, and measured room conditions.
What should buyers budget beyond the EV-115 price?
Buyers should budget for the complete installed system, not only the supplied $1,792.44 projector price. Possible costs include mounting and structural hardware, cabling, transport equipment, electrical work, audio, control, labor, testing, documentation, and training.
Conclusion
Use this AV EV-115 Setup Guide and Buying Considerations comparison to match the product to the room, budget, installation requirements, and current AudioVideoNation availability. Review the linked product pages for the latest pricing, stock details, and full product information before ordering.
Products Used
| SKU | Product Name | URL |
|---|---|---|
| EV-115 | Epson LightScene EV-115 2200-Lumen WXGA Laser 3LCD Projector (Black) | View product |
| AT-OME-ST31A-KIT | Atlona AT-OME-ST31A-KIT HDBaseT TX/RX for HDMI and USB-C | View product |
| AT-AVA-EX70-2PS-KIT | Atlona AT-AVA-EX70-2PS-KIT Avance 4K HDMI Transmitter and Receiver HDBaseT Extender Kit | View product |