Floor Stand Landscape & Portrait 400x400 150Lbs Max Weight

Ideal Use Cases

The Mustang Professional MPS-M44V is a floor display stand for installations that require landscape or portrait positioning without a wall-mounted setup. It is designed for displays from 32 to 55 inches and supports loads up to 150 lb. This combination makes it suitable when a project calls for a freestanding display within that defined size and weight range. Its black finish provides a neutral appearance, while the maximum display height of 67.34 inches establishes a clear reference point for planning sightlines and placement.

Why Choose This Model

The MPS-M44V combines orientation flexibility with a substantial mounting capacity. Displays can be installed in either landscape or portrait orientation, allowing the stand to accommodate horizontal and vertical content formats. It supports mounting patterns up to 400 x 400 mm and provides a tilt range of +15 degrees to -5 degrees. These specifications give installers control over display orientation and viewing angle while maintaining compatibility with a defined range of display sizes, mounting patterns, and weights.

High-grade cold-rolled steel forms the stand’s primary construction. Its black epoxy powder-coat finish is scratch resistant, supporting a consistent appearance during regular use. The stand is also backed by a limited lifetime warranty.

Installation and Integration

Before installation, confirm that the intended display measures between 32 and 55 inches, weighs no more than 150 lb, and uses a mounting pattern no larger than 400 x 400 mm. All three conditions should be checked independently, since display size alone does not establish weight or mounting-pattern compatibility.

The selected landscape or portrait orientation should be determined as part of the installation plan. The available +15-degree/-5-degree tilt range can then be used to establish the required viewing angle. The maximum display height is 67.34 inches, providing an additional measurement for evaluating the display’s final position. Base dimensions, included mounting hardware, cable-routing provisions, and assembly requirements are not specified in the supplied product data and should be confirmed separately when those details affect the installation.

Performance Highlights

The MPS-M44V supports a maximum load of 150 lb and a maximum 400 x 400 mm mounting pattern. Its specified 32- to 55-inch display range covers several common display sizes while maintaining clearly stated compatibility limits. The +15-degree forward and -5-degree reverse tilt adjustment provides a 20-degree total specified range for refining the display angle.

Its 67.34-inch maximum display height helps define the upper installation position. Landscape and portrait support allows the same stand model to address either horizontal or vertical display requirements, provided the display remains within the stated dimensional, weight, and mounting-pattern limits.

What Makes It Different

This model brings together four practical attributes: landscape and portrait installation, a 150 lb weight capacity, support for mounting patterns up to 400 x 400 mm, and adjustable tilt. Rather than limiting the display to one content orientation, the MPS-M44V can be configured for either of the two specified formats. The cold-rolled steel construction and scratch-resistant epoxy powder coat add material and finish details that are directly relevant to long-term product selection.

The black color keeps the stand visually understated, while the limited lifetime warranty adds manufacturer coverage. These characteristics distinguish the MPS-M44V as a purpose-defined floor mounting option with clearly documented compatibility and adjustment limits.

Final Assessment

The Mustang Professional MPS-M44V is a strong match for a freestanding display installation requiring a 32- to 55-inch screen, landscape or portrait orientation, and a load capacity of up to 150 lb. Its 400 x 400 mm maximum mounting pattern, +15-degree/-5-degree tilt, and 67.34-inch maximum display height provide the essential measurements needed for compatibility planning. High-grade cold-rolled steel, a scratch-resistant black epoxy powder coat, and a limited lifetime warranty complete a specification set focused on mounting capacity, positioning, and material construction.