4K60 4:2:0 HDMI Receiver w/ RS-232, IR & Stereo Audio Extraction over LR

Ideal Use Cases

The TP-580RA is designed for AV signal paths in which an HDMI source and its receiving display or downstream device are separated by CAT copper cabling. It is particularly relevant when the remote endpoint also needs RS-232, IR, and access to embedded stereo audio, because these signals are carried over the twisted-pair connection. At the receiving end, the unit de-embeds the stereo audio signal through digital and analog audio ports. Its specified 4K reach supports layouts requiring up to 40m (130ft) between HDBaseT endpoints at 4K@60Hz with 4:2:0 chroma sampling.

Why Choose This Model

The central advantage of the TP-580RA is its combination of long-reach video reception, control-signal transport, and local audio extraction. Rather than handling HDMI, serial control, IR, and stereo audio as unrelated functions, the receiver processes them at the destination of a long-reach HDBaseT connection. Its 10.2Gbps bandwidth and stated support for 4K@60Hz 4:2:0 video provide a clearly defined performance level. Stereo audio remains part of the transported signal and can then be accessed locally from either a digital or analog audio port.

Installation and Integration

The TP-580RA is installed at the receiving end of a twisted-pair signal path. The link uses CAT copper cable and extends 4K@60Hz 4:2:0 video up to 40m (130ft). That distance applies to the documented 24bpp 4K format. The source data also states that lower HD video resolutions can be carried over even longer distances, although it does not provide a specific maximum for those formats. At the destination, the received HDMI content can be integrated with the required RS-232 and IR control paths. Installers can also select the digital or analog audio connection appropriate for the de-embedded stereo signal. This arrangement is useful when video, control, and audio must arrive together but serve separate destination equipment.

Performance Highlights

At its highest documented video format, the TP-580RA handles 4K resolution at a 60Hz refresh rate with 4:2:0 chroma sampling and 24-bit-per-pixel video. Available signal bandwidth is specified at 10.2Gbps. Over CAT copper cable, that format can travel up to 40m, equivalent to 130ft. The receiver also accommodates lower HD video resolutions and provides additional reach for those formats. Together, these specifications define the model as a long-reach receiver focused on 4K60 4:2:0 distribution rather than an unspecified general-purpose extender.

What Makes It Different

The defining feature is stereo audio de-embedding combined with HDMI extension and control-signal reception. In addition to receiving the HDMI, RS-232, IR, and stereo audio signals transported over twisted pair, the TP-580RA makes the stereo audio available through both digital and analog audio ports. This gives the destination system two documented audio interface forms without changing how the stereo signal is carried across the HDBaseT link. The model also states its video boundaries precisely: 4K@60Hz, 4:2:0 chroma sampling, 24bpp processing, 10.2Gbps bandwidth, and a maximum 4K extension distance of 40m.

Final Assessment

The TP-580RA is a focused receiving solution for systems built around 4K@60Hz 4:2:0 HDMI, long-reach HDBaseT transport, RS-232, IR, and stereo audio extraction. It is a strong match when the receiving location needs digital or analog access to the embedded stereo audio while retaining the control signals transported with the video. Selection should be based on its documented 40m maximum at 4K60 4:2:0 and 24bpp. For lower HD resolutions, the available data confirms greater reach but does not specify an exact distance.