4K60 4:2:0 HDMI Transmitter with USB, RS 232, & IR HDBaseT 2.0

The Kramer TP-590T is a high-performance, long-reach HDBaseT 2.0 transmitter built to move 4K60 HDMI together with USB, RS-232, and IR signals over twisted-pair cabling. It converts its input signals into an HDBaseT 2.0 signal for transmission over CAT copper cable. At the top stated video format, 4K@60Hz with 4:2:0 color sampling and 24bpp color depth, it extends the signal up to 40m (130ft), with further reach available when lower HD video resolutions are used.

Ideal Use Cases

This model is suited to an AV link in which an HDMI source and the receiving side must be separated by a substantial cable run while USB and control signals also need to cross the link. It is especially relevant when the target format is 4K at 60Hz with 4:2:0 sampling, or when lower-resolution HD signals need to travel beyond the stated 4K distance. Its combination of HDMI, USB, serial control, and IR makes it a focused choice for integrated systems that require both media and control transport over twisted pair.

Why Choose This Model

The central reason to select the TP-590T is its clearly defined 4K60 transport capability: up to 4K@60Hz, 4:2:0, and 24bpp across as much as 40m (130ft) of CAT copper cable. The transmitter also handles USB, RS-232, and IR, so the HDBaseT connection is not limited to picture transport. A stated bandwidth of 10.2Gbps supports its specified video performance. For projects that need this exact balance of resolution, refresh rate, control support, and long-reach transmission, the model provides a specific and measurable fit.

Installation and Integration

Plan the cable path around the required video format and distance. For operation at up to 4K@60Hz with 4:2:0 sampling and 24bpp, the stated maximum extension distance is 40m (130ft) over CAT copper cable. Lower HD resolutions can be carried farther, although the source data does not state a maximum distance for those formats. Connect the required HDMI, USB, RS-232, and IR inputs to the transmitter, then route the converted HDBaseT 2.0 signal across the twisted-pair link. Cable category requirements, receiver details, power specifications, and included accessories are not specified in the available data and should be confirmed for the final system design.

Performance Highlights

The TP-590T supports a maximum stated refresh rate of 60Hz and bandwidth of 10.2Gbps. Its headline mode is 4K@60Hz video using 4:2:0 chroma sampling at 24 bits per pixel. At that format, it reaches up to 40m (130ft) over CAT copper cable. The system also provides additional distance when the video resolution is reduced to a lower HD format, but no exact lower-resolution distance is supplied. These defined limits make it possible to assess the transmitter against a planned cable run without assuming unsupported resolution, color, or distance capabilities.

What Makes It Different

Rather than being described only by its video resolution, the TP-590T brings four signal categories into its HDBaseT 2.0 transmission path: HDMI, USB, RS-232, and IR. That mix addresses image delivery, USB connectivity, serial control, and infrared control within the transmitter’s stated function. The other distinguishing element is the relationship between format and reach: the product specifies 40m (130ft) at 4K60 4:2:0 and notes greater reach at lower HD resolutions. This is useful when system priorities shift between maximum resolution and maximum cable distance.

Final Assessment

The TP-590T is a purpose-built transmitter for installations that require 4K60 4:2:0 HDMI and accompanying USB, RS-232, and IR transport over long-reach HDBaseT 2.0. Its strongest documented specifications are 10.2Gbps bandwidth, 60Hz refresh capability, 24bpp video at the stated 4K format, and extension up to 40m (130ft) over CAT copper cable. It is the appropriate model to evaluate when those signal types and distances match the design. Details not supplied here, including physical, power, warranty, and package contents, should remain open until separately documented.