Swivel/Tilt Wall Mount for 17″ to 42″ TVs and Monitors, 180° Swivel, -15° to +15° Tilt, -3° to +3° Screen Adjustment

The Eaton Tripp Lite series DWM1742S is a full-motion wall mount for one flat-panel TV or monitor from 17 to 42 inches. Its steel construction supports displays weighing up to 44 lb, while an extending arm and three forms of screen adjustment provide flexible positioning. Compatible VESA patterns include 100 x 100, 200 x 100, 100 x 200 and 200 x 200.

Ideal Use Cases

This mount is suited to installations where a display needs to be positioned beyond the fixed viewing angle of a basic wall mount. Its 180-degree swivel can direct the screen toward different parts of a room, while the adjustable tilt supports viewing from above or below the display’s installed height. The DWM1742S works with compatible monitors and HDTVs, making it applicable to workspaces, entertainment areas and other wall-mounted display arrangements. It accommodates one display within the specified 17- to 42-inch size range and 44 lb weight limit.

Why Choose This Model

The DWM1742S combines broad directional movement with a substantial extension range. The arm adjusts from a listed minimum extension of 2.16 to a maximum of 22.85, allowing the display to remain closer to the wall or move outward when a different viewing position is needed. One-touch adjustment supports comfortable viewing without requiring the screen to remain in a single fixed orientation. The steel mount also provides four commonly used VESA configurations, helping buyers match the mounting interface to a compatible TV or monitor.

Installation and Integration

The mount is designed for wall installation and includes mounting hardware, tools and an owner’s manual. Package contents consist of three anchor bolts, three concrete anchors, four M4 x 14 screws, four M5 x 14 screws, four M6 x 14 screws, four M8 x 20 screws, four D5 washers, four D8 washers and eight small spacers. A wrench, a 4 mm hex key and a 6 mm hex key are also supplied.

Before installation, confirm that the display weighs no more than 44 lb and uses one of the supported VESA patterns: 100 x 100, 200 x 100, 100 x 200 or 200 x 200. The listed product dimensions are 19.6 inches wide, 15.7 inches in length or depth and 3.6 inches high. The mount itself weighs 10.4 lb. Its black and silver finish should also be considered when coordinating the mount with the display and surrounding installation.

Performance Highlights

The full-motion assembly provides 180-degree swivel and tilt adjustment from -15 to +15 degrees. This combination permits horizontal redirection as well as upward or downward screen positioning. A separate -3- to +3-degree level adjustment allows minor rotational correction after the display is mounted. Together, these movement ranges make it possible to refine the display’s orientation without changing its wall location. The extending arm adds another positioning dimension, moving between its listed 2.16 minimum and 22.85 maximum extension.

What Makes It Different

Three independent adjustment types distinguish the DWM1742S from a fixed wall-mount format. Swivel changes the direction the screen faces, tilt alters its vertical viewing angle and level adjustment provides small corrective rotation. The mount also brings these capabilities together with one-touch adjustment and support for displays up to 44 lb. Its single-display design keeps the configuration focused, while the included assortment of screws, washers, spacers, anchors and tools provides the specified components in one package.

Final Assessment

The Eaton DWM1742S is a practical choice for a compatible 17- to 42-inch monitor or HDTV that requires full-motion wall positioning. Its 180-degree swivel, ±15-degree tilt, ±3-degree level correction and extending arm provide multiple ways to establish the desired viewing angle. Steel construction, a 44 lb capacity, four supported VESA patterns and an extensive hardware package complete a clearly specified mounting solution for one display.