Swivel/Tilt Wall Mount with Screen Adjustment for 13″ to 27″ TVs

The Eaton Tripp Lite series DWM1327SP is a standard wall-mount solution for one 13-inch to 27-inch flat-panel monitor or HDTV. Its steel construction supports a display weighing up to 33 lb (14.9 kg), while full-motion adjustment lets the screen move closer to the wall or extend outward for a more useful viewing position. The silver-and-black mount combines a 2.16-to-22.85-inch arm extension with one-touch screen adjustment.

Ideal Use Cases

This model fits spaces where a single small-format TV or monitor needs flexible positioning from a wall. It is suited to 13-inch through 27-inch flat-panel displays and works with both monitors and HDTVs. The extending arm is useful when the screen must be brought forward, angled toward a viewer, or returned nearer the wall. Its supported VESA patterns—75×75, 75×100, 100×75, and 100×100—cover the mounting interfaces stated for this model.

Why Choose This Model

The DWM1327SP brings reach and directional adjustment together in one mount. It supports up to 33 lb and provides 180-degree swivel, tilt from -15 degrees to +15 degrees, and screen-level adjustment from -2 degrees to +2 degrees. Those ranges allow the display angle to be refined after mounting without changing the wall position. The one-touch adjustment design is intended to make comfortable viewing changes straightforward, while steel provides the construction material specified by Eaton.

Installation and Integration

The mount installs on a wall and requires tools. Before installation, match the display to one of the four listed VESA patterns and confirm that its weight does not exceed 33 lb. The package includes the DWM1327SP mount, four M4 screws, four M5 screws, four washers, three anchor bolts, three concrete anchors, a wrench, 4 mm and 6 mm hex keys, and an owner’s manual. These supplied components provide the listed mounting and adjustment hardware for setup.

The mount measures 22.83 inches in length/depth, 7.48 inches in height, and 5.2 inches in width, with a product weight of 5.9 lb. These measurements help with planning wall placement and clearance for the arm’s movement. Follow the supplied owner’s manual during installation and use the listed level adjustment to fine-tune the screen once it is secured.

Performance Highlights

Full motion is the central performance benefit. The arm contracts to a minimum extension of 2.16 inches and reaches a maximum of 22.85 inches. At the viewing end, 180-degree swivel offers broad side-to-side orientation, while the 30-degree total tilt range moves from -15 degrees to +15 degrees. A smaller -2-degree to +2-degree level adjustment helps correct the final screen position. Together, these controls allow more precise placement than a fixed wall mount.

What Makes It Different

This model distinguishes itself through the combination of compact-display compatibility, extensive arm reach, and three separate forms of adjustment. It is not limited to tilt alone: it also swivels and permits minor screen leveling. Support for four VESA patterns adds mounting flexibility across compatible monitors and HDTVs, and the single-display design keeps the application focused. The silver-and-black finish and steel material define its physical build, while RoHS, RoHS3, and REACH are the listed compliances.

Final Assessment

For a compatible 13-inch to 27-inch flat panel, the DWM1327SP offers a clear set of capabilities: wall mounting, a 33 lb capacity, up to 22.85 inches of arm extension, 180-degree swivel, -15-degree to +15-degree tilt, and -2-degree to +2-degree level correction. It fits applications where one monitor or HDTV needs more positional freedom than a fixed mount provides. Confirm display size, weight, and VESA pattern against the listed limits before installation.