3-Phase Managed HDX Rack PDU G4, 240/415V, 48 C13 Outlets, 60A, 35kW,

3-Phase Managed HDX Rack PDU G4, 240/415V, 48 C13 Outlets, 60A, 35kW

The 3-Phase Managed HDX Rack PDU G4 is built for professional rack environments that need organized, high-capacity power distribution across a large number of connected devices. With 240/415V three-phase support, 60A capacity, 35kW power handling, and 48 C13 outlets, this model is designed for dense equipment racks where standard plug strips are not enough. It is especially well suited to installations that benefit from managed power distribution and clearer outlet planning across critical hardware.

Ideal Use Cases

This model fits demanding technical spaces where many devices must be powered from a single rack distribution point while maintaining structure and scalability. It is a practical choice for teams building out high-density cabinets or standardizing power delivery across multiple racks.

• Server racks with many IEC C13-connected devices
• Networking racks supporting switches, routers, and related hardware
• AV and control-room racks with processors, control systems, and supporting equipment
• Enterprise equipment rooms using 240/415V three-phase power
• Professional installations that require managed rack power distribution rather than basic power strips

Because it combines 48 C13 outlets with a 35kW rating, this unit is particularly relevant when outlet count and overall power capacity both matter. Buyers outfitting dense racks can use it to simplify power organization while supporting substantial connected loads.

Why Choose This Model

The key advantage of this PDU is that it brings together high-capacity three-phase distribution and a managed rack-power approach in one rack-ready solution. For professional environments, that means better alignment with structured deployment practices than a simple unmanaged strip.

• 240/415V three-phase support for demanding rack power requirements
• 60A capacity for higher-load installations
• 35kW power handling for dense equipment deployments
• 48 C13 outlets for broad device connectivity across a single rack or cabinet setup
• Managed design for environments where power visibility and outlet organization are important

If you are equipping a rack with a large number of compatible devices, this model helps reduce the need to piece together multiple lower-capacity distribution products. That can make planning cleaner and more consistent for IT teams, facilities teams, and systems integrators.

Installation and Integration

This PDU should be matched carefully to the site’s electrical infrastructure before deployment. Confirm compatibility with 240/415V three-phase service and verify that the installation can support a 60A, 35kW rack power device. For best results, plan outlet assignments before equipment is installed so loads can be distributed logically and service access remains straightforward.

In high-density racks, thoughtful integration can improve day-to-day usability. Consider the following during deployment:

• Map which devices will use the 48 C13 outlets before final installation
• Coordinate cable routing to maintain rack organization
• Allow for proper airflow and service access around connected equipment
• Verify upstream circuit design and inlet compatibility with the intended rack environment
• Use qualified personnel and follow local electrical and safety requirements

This model is best suited to professional installations where power distribution is part of a broader rack design strategy rather than an afterthought.

Performance Highlights

For buyers comparing rack PDUs by capacity and connectivity, the most important facts here are straightforward: this unit supports 240/415V input, delivers 60A capacity, handles up to 35kW, and provides 48 C13 outlets. Those numbers position it for substantial rack loads and a high device count in one distribution platform.

• Voltage: 240/415V
• Capacity: 60A
• Power handling: 35kW
• Outlets: 48 x C13
• Application focus: managed three-phase rack power distribution

That combination makes it a strong fit for dense server, network, AV, and control-room racks where organized power delivery is essential to keeping installations scalable and maintainable.

What Makes It Different

What sets this model apart is not a single feature, but the way its core specifications align with real-world rack requirements. Many installations need both a high outlet count and meaningful power capacity. Here, you get 48 C13 outlets paired with three-phase 240/415V support, 60A capacity, and 35kW handling in a managed rack PDU format.

That makes it a compelling option for buyers who are moving beyond entry-level rack power and need a solution better matched to dense, professional environments. It is especially relevant when the goal is to create a more organized rack power foundation for critical devices across IT, networking, and AV infrastructure.

Final Assessment

The 3-Phase Managed HDX Rack PDU G4 is a purpose-built choice for professional users who need high-capacity, managed rack power distribution with a large number of C13 connections. With 240/415V three-phase support, 60A capacity, 35kW power handling, and 48 outlets, it is well aligned with dense server, networking, AV, and control-room deployments. If your project calls for structured power delivery in a demanding rack environment, this model offers the capacity and outlet count to support that objective with a more organized approach.