5.5kW Single-Phase Switched PDU – LX Interface, 208/230V Outlets (16 C13

The PDUMH30HVNET is a 5.5kW single-phase switched PDU designed for rack environments that need more than basic power distribution. With 16 C13 outlets, 208/230V output support, and an LX Interface for management, it gives AV and IT teams a practical way to organize power delivery while adding remote switching and reboot capability at the outlet level. For installations where uptime, service efficiency, and controlled power access matter, this model helps turn a standard rack into a more manageable and support-friendly deployment.

Ideal Use Cases

This model is well suited for professional environments where multiple rack-mounted devices need centralized power and occasional remote intervention. It fits especially well in spaces where sending staff onsite for a manual reboot is inconvenient, slow, or costly.

• AV equipment racks in meeting spaces and control rooms
• Server rooms and network closets with 208/230V rack equipment
• Education, enterprise, and managed service deployments
• Edge installations where remote troubleshooting is part of normal support
• Mixed racks with switches, servers, control processors, and AV distribution gear

Because it combines 5.5kW capacity with 16 C13 outlets, it is a strong fit for buyers who need to power several devices from a single single-phase source while keeping power control organized.

Why Choose This Model

Not every rack needs switched outlet control, but when it does, the operational advantages are clear. The PDUMH30HVNET is a smart choice for teams that want faster recovery from device lockups, cleaner maintenance workflows, and more deliberate power management across connected equipment.

• 5.5kW capacity supports higher-density single-phase rack applications
• 16 C13 outlets provide flexibility for multi-device deployments
• Switched functionality enables remote reboot and outlet control
• LX Interface supports managed operation rather than simple pass-through distribution
• 208/230V outlet support aligns with installations using higher-voltage rack power

For integrators and support teams, that means fewer unnecessary site visits and better control over how rack devices are powered during setup, maintenance, and recovery.

Installation and Integration

This PDU is intended for buyers planning a structured rack power strategy. Before deployment, confirm that your site has an appropriate single-phase input source and that connected equipment uses compatible C13 connections. In shared or mixed-use racks, thoughtful outlet mapping can make day-to-day management much easier.

Best practices for integration include:

• Verify available 208/230V single-phase feed capacity before installation
• Match connected devices to the 16 C13 outlet configuration
• Group critical equipment logically for easier remote management
• Document outlet assignments for support and maintenance teams
• Leave load headroom for startup and inrush demands where applicable

In AV and IT environments alike, a switched PDU is most valuable when outlet control is part of the operating plan. If your team needs remote power cycling, organized device grouping, or cleaner shutdown and startup procedures, this model supports those goals well.

Performance Highlights

The key strength of the PDUMH30HVNET is not just that it distributes power, but that it helps teams manage power more effectively. In practical terms, that can improve response time when equipment becomes unresponsive and simplify routine administration across a populated rack.

• Delivers up to 5.5kW for rack-based equipment loads
• Provides 16 C13 outlets for broad device coverage
• Supports 208/230V output for compatible equipment environments
• Enables remote switching and reboot capability
• Helps support controlled startup sequencing and shutdown planning

These capabilities are especially useful in installations where uptime matters and support teams need a reliable way to recover devices without direct physical access. Instead of treating power as a static utility, this model makes it part of an active rack management approach.

What Makes It Different

The differentiator here is the combination of switched functionality, 5.5kW single-phase capacity, 208/230V support, and 16 C13 outlets in one rack-focused power distribution solution. That mix makes it appealing for buyers who have outgrown basic PDUs but do not need to move into a more complex three-phase design.

It also stands out for buyer fit. This is not simply a power strip for a rack; it is better suited for environments where administrators, integrators, and service teams need a more intentional level of control. If your workflow includes remote rebooting, service triage, or structured power organization, this model aligns with those operational needs.

Final Assessment

For rack deployments that require managed power distribution, the PDUMH30HVNET offers a strong balance of capacity, outlet count, and control. Its 5.5kW single-phase design, 16 C13 outlets, 208/230V support, and LX Interface make it a practical choice for AV racks, server rooms, network closets, and other professional installations where remote switching adds real value.

Buy this model if your team needs organized rack power with the ability to remotely switch outlets, reboot connected devices, and streamline support across multiple pieces of equipment. It is best suited for professional environments where operational control is a requirement, not an afterthought.