3.7kW 208/230V Single-Phase Local Metered PDU - 16 C13 & 4 C19 Outlets, C20/L6-20P Input, 10-ft. (3.05 m) Cord, 40 in. 0U Rack

The 3.7kW 208/230V Single-Phase Local Metered PDU is designed for rack environments that need dependable power distribution with local visibility into load usage. With 16 C13 outlets and 4 C19 outlets, it provides a practical mix of connections for network gear, switches, servers, and higher-draw AV or IT devices. The unit is built for 0U vertical rack mounting in a 40 in. rack space, helping preserve valuable rack units for active equipment while keeping power organized and accessible.

This model is a strong fit for IT closets, edge deployments, equipment racks, and AV installations where monitoring current draw at the rack is important. Local metering helps installers and administrators check power consumption directly at the unit, which is useful during commissioning, troubleshooting, and ongoing capacity planning. The included 10-ft. cord gives added flexibility for locating the PDU within the rack and reaching the power source cleanly.

Who it is for: integrators, IT managers, system administrators, and AV professionals who need a vertically mounted rack PDU with mixed outlet types and local current monitoring. It is especially useful where equipment density is moderate to high and the rack contains both standard IEC devices and hardware requiring C19 connections.

Why buy it: it simplifies power distribution, helps reduce cable clutter, and gives immediate local feedback on load conditions. That makes it easier to balance equipment across a circuit and avoid unnecessary overloading. The C20/L6-20P input configuration supports flexible connection options depending on the installation power source.

Common use cases: server racks, network cabinets, control rooms, AV headends, and distributed IT closets. It is also a good choice for environments that need a neat vertical PDU with a combination of outlets for mixed device types.

Deployment guidance: verify the available 208/230V single-phase power source before installation and confirm that the upstream circuit and receptacle match the intended input configuration. Plan outlet placement so heavier loads are distributed evenly across the rack, reserve the C19 outlets for equipment with higher current demand, and use the local meter as part of your routine load checks. For best results, integrate the PDU into a rack layout that allows the 10-ft. cord to route without strain or obstruction.