3-Phase Local Metered PDU, 23kW, 42 208-240V outlets (36 C13, 6 C19), IEC309 32A Red (3P+N+E) 360-415V Input, 0u vertical, TAA

3-Phase Local Metered PDU, 23kW, 42 208-240V outlets (36 C13, 6 C19), IEC309 32A Red (3P+N+E) 360-415V Input, 0U vertical, TAA is built for rack environments that need high outlet density, three-phase power distribution, and straightforward rack-level visibility. With 23kW capacity and 42 total outlets, this unit helps support mixed IT loads in a single cabinet while preserving valuable rack space through its vertical 0U form factor.

The outlet configuration includes 36 IEC C13 and 6 IEC C19 receptacles, making it well suited for deployments that combine standard server and networking hardware with higher-draw devices. Fed by an IEC309 32A Red (3P+N+E) 360-415V input and designed for 208-240V equipment at the outlet level, it fits structured power environments where consistency, density, and on-site monitoring matter. TAA compliance also makes it relevant for procurement scenarios where that requirement is part of the specification.

Ideal Use Cases

This model is a practical fit for installations where multiple device types share the same rack and power visibility is needed at the cabinet.

• High-density server racks in enterprise data centers
• Colocation cabinets where 0U mounting helps maximize usable rack space
• Network closets supporting switches, security appliances, and storage gear
• Mixed-load racks using both IEC C13 and IEC C19 powered equipment
• Three-phase power environments that require local metering rather than remote management

Because it provides 42 outlets in one vertical unit, it can simplify power distribution in cabinets that would otherwise require multiple strips or a less organized outlet strategy.

Why Choose This Model

Buyers looking for a balance of capacity, outlet flexibility, and installation efficiency will find this PDU especially compelling. Its 23kW rating supports demanding rack deployments, while the combination of 36 C13 and 6 C19 outlets gives IT teams flexibility when powering a broad mix of equipment.

• 23kW power capacity for substantial rack-level distribution needs
• 42 total outlets for high device counts in a single cabinet
• 36 x IEC C13 outlets for common server and network connections
• 6 x IEC C19 outlets for equipment that requires a higher-capacity connector type
• Local metering for on-site power usage visibility during deployment and operation
• 0U vertical mounting to keep rack units available for installed equipment
• TAA designation for environments with applicable sourcing requirements

For teams standardizing rack power across multiple cabinets, this model offers a clear, structured way to support mixed equipment without giving up rack space.

Installation and Integration

This PDU is intended for 3-phase power environments using an IEC309 32A Red (3P+N+E) 360-415V input. Before deployment, installers should confirm upstream electrical compatibility and verify that connected devices are designed for 208-240V outlet power. Matching the rack’s equipment profile to the available C13 and C19 outlet mix can help streamline installation and reduce the need for adapters.

The 0U vertical design is especially useful in full racks where every rack unit counts. Mounting the PDU along the side of the enclosure can support cleaner cable routing and preserve front-facing equipment space. For best integration results, plan outlet assignments in advance so power cords reach naturally without interfering with rails, airflow paths, doors, or cable management hardware.

• Designed for vertical 0U rack mounting
• Supports integration into compatible 3-phase infrastructures
• Works with 208-240V equipment at the outlet level
• Suitable for cabinets with mixed C13 and C19 device requirements

Performance Highlights

This unit stands out by combining high outlet count with a power architecture suited to modern rack deployments. In practical terms, it helps centralize rack power distribution while giving staff local insight into power usage. That can be useful during initial turn-up, equipment changes, and ongoing capacity planning.

• 23kW maximum power rating
• 42 total outlets across one PDU
• 208-240V outlet support for compatible IT equipment
• IEC309 32A Red (3P+N+E) input for structured 360-415V power feeds
• Local metering to support rack-level monitoring on site

The mixed outlet layout is a key operational advantage for racks that include standard compute hardware alongside devices that use C19 connections. Instead of splitting loads across separate PDUs solely for connector compatibility, this model allows broader device support within one vertical distribution unit.

What Makes It Different

What differentiates this model is the combination of three-phase input, local metering, 23kW capacity, and a 42-outlet mix in a space-saving 0U vertical format. Many rack power decisions come down to tradeoffs between capacity, connector variety, and available mounting space. This unit addresses all three in one design built for dense cabinet deployments.

It is particularly attractive for buyers who need:

• High outlet density without consuming rack units
• A blend of 36 C13 and 6 C19 connections in one PDU
• Rack-level visibility through local metering
• Compatibility with 3-phase 360-415V input infrastructure
• A TAA-compliant option for qualified purchasing environments

That mix makes it a strong choice for standardized deployments where power organization and practical serviceability matter as much as raw outlet count.

Final Assessment

For data centers, network rooms, and colocation racks that need organized three-phase power distribution, this 0U vertical local metered PDU delivers a strong combination of density and usability. Its 23kW rating, 42 total outlets, and balanced mix of 36 IEC C13 plus 6 IEC C19 receptacles make it well suited for mixed IT equipment in a single cabinet.

If your environment uses a compatible IEC309 32A Red (3P+N+E) 360-415V input and your equipment runs on 208-240V outlets, this model offers a practical, space-efficient way to distribute power while keeping local usage visibility at the rack. For buyers prioritizing outlet count, vertical installation, and flexible connector support, it is a well-aligned choice.