Headset Microphone; Noise-Canc eling Mini Mic Plug Only

Ideal Use Cases

The Williams AV MIC 044 is a replacement headset microphone intended for use with the Williams AV IC-2 interpreter console and PFM T36 transmitter. Its 3.5 mm mono plug and 39-inch cord make it suited to replacing an existing MIC 044 in those named systems without changing the specified connector format. The black headset design supports applications where the microphone needs to remain positioned near the speaker while the connected console or transmitter is in use.

This model is relevant for interpretation setups built around the IC-2, portable communication arrangements using the PFM T36, and replacement inventories that require the exact MIC 044 model. The product title also identifies it as a noise-canceling mini microphone. For buyers matching existing equipment, the model, plug type, cord length, impedance, and phantom-power range provide the primary compatibility details to check before purchase.

Why Choose This Model

The MIC 044 combines an electret condenser element with a stated frequency response of 150 Hz to 18 kHz. The technical data lists an omni-directional pick-up pattern, 32-ohm impedance, and operation from 1.2 to 10 VDC phantom power. These published specifications give system integrators concrete electrical and acoustic parameters for evaluating the microphone against the intended Williams AV equipment.

At 0.17 lb, the microphone is lightweight, and its black finish provides a straightforward appearance. RoHS approval is listed, and the product carries a 90-day warranty. The specified replacement items also make maintenance planning more direct: WND 008 for the windscreen and EAR 035 for the earpad.

Installation and Integration

Integration centers on the 3.5 mm mono plug. Connect the microphone only to compatible equipment that meets the listed connector and phantom-power requirements. The specified 1.2 to 10 VDC phantom-power range should be checked against the target input before use. The 39-inch cord provides the documented cable length for routing between the headset microphone and the IC-2 interpreter console or PFM T36 transmitter.

For replacement work, confirm the MIC 044 model designation rather than relying on connector size alone. A 3.5 mm connection does not by itself establish full system compatibility; the mono format, 32-ohm impedance, and power requirement are also relevant. No mounting accessories, adapters, or additional package contents are identified in the supplied product information.

Performance Highlights

The microphone’s documented 150 Hz to 18 kHz response defines its stated operating frequency range. Its electret condenser element is paired in the technical specifications with an omni-directional pick-up pattern. The source description separately refers to a cardioid condenser configuration, so purchasers who require a particular directional pattern should verify that detail for the exact unit before ordering.

Electrical specifications include 32-ohm impedance and 1.2 to 10 VDC phantom power. These values are especially important when the MIC 044 is used outside a direct, like-for-like replacement scenario. The listed 3.5 mm mono plug identifies both the connector size and mono format, while the 39-inch cord establishes the available wired reach.

What Makes It Different

This is a model-specific Williams AV replacement rather than a general-purpose microphone accessory. Its distinguishing details are the MIC 044 designation, compatibility references to the IC-2 and PFM T36, 3.5 mm mono termination, and published replacement-part information. Those identifiers help separate it from microphones that may use a similar-looking plug but have different wiring, power, or acoustic characteristics.

The maintenance references are particularly specific within the available data. WND 008 is the designated replacement windscreen, while EAR 035 is the designated replacement earpad. This allows operators maintaining multiple units to identify the named service components without substituting unspecified parts. The listed RoHS approval and 90-day warranty provide two further documented purchasing details.

Final Assessment

The Williams AV MIC 044 is best evaluated as a replacement headset microphone for the IC-2 interpreter console and PFM T36 transmitter. Its core specification set includes a 3.5 mm mono plug, 39-inch cord, electret condenser element, 150 Hz to 18 kHz frequency response, 32-ohm impedance, and 1.2 to 10 VDC phantom power. It is black, weighs 0.17 lb, carries RoHS approval, and has a 90-day warranty.

Choose it when the MIC 044 model and its documented electrical requirements match the system being serviced. For upkeep, use the stated WND 008 windscreen and EAR 035 earpad references. Buyers should confirm the required pick-up pattern because the supplied source description calls the microphone cardioid while the technical specification table lists it as omni-directional.