Full-Range Processed Ceiling Speaker- 5"- Back-can- 25/70.7 V Transformr

Ideal Use Cases

The TOA F-122CU2 is identified as a full-range processed ceiling speaker in a 5-inch format. It directly matches specifications calling for a ceiling speaker, a back-can configuration, and a 25/70.7 V transformer. The product page places it in TOA’s F Series of wide-dispersion ceiling speakers and publishes a 180-degree dispersion figure averaged across 1–4 kHz.

This model is most relevant to system designs where broad stated dispersion is a primary selection criterion and where the listed transformer voltages are part of the project brief. The supplied data does not define room type, coverage distance, sound-pressure capability, or environmental use. Those factors should therefore be evaluated separately for the intended installation.

Why Choose This Model

The strongest reason to select the F-122CU2 is its clear combination of named requirements: a full-range processed design, 5-inch format, back-can, and 25/70.7 V transformer. Its model-specific product page also supplies a quantified wide-dispersion specification rather than describing its coverage only in general terms.

The available information makes it straightforward to determine whether the speaker aligns with a written equipment schedule. However, the source does not provide power handling, sensitivity, impedance, transformer tap settings, frequency-response range, or maximum output. Projects depending on those values will require additional verification before final selection.

Installation and Integration

The F-122CU2 is intended for ceiling placement and is identified with a back-can. Its transformer is specified for 25/70.7 V. These details provide the principal integration references available in the supplied product data and allow the model to be considered for designs based on either listed transformer voltage.

No cutout diameter, overall dimensions, mounting hardware, connector type, transformer tap values, cable requirements, or weight are stated. Installers should not infer those details from the 5-inch product designation. Physical fit, mounting provisions, wiring configuration, and the required transformer setting should be confirmed against the project requirements before ordering or installation.

Three product views are provided: an angled view, a front view with the baffle removed, and a side view. These images offer multiple visual perspectives of the speaker, but they should not be treated as dimensional drawings.

Performance Highlights

The principal published performance figure is 180-degree wide dispersion, averaged from 1 to 4 kHz. Stating the averaging range is important because it defines the frequency span associated with the dispersion figure. The supplied data does not establish that the same coverage applies outside that range.

“Full-range” and “processed” are part of the supplied product title, although no frequency-response boundaries or processing method are provided. The source also contains a technical field labeled “refresh rate” with a value of 70 Hz. Because that terminology is atypical for a ceiling speaker and arrives without explanatory context, it is preserved in the specifications without being reinterpreted as frequency extension, bandwidth, or a cutoff point.

What Makes It Different

Within the available information, the F-122CU2 stands out through the combination of its F Series wide-dispersion classification, 180-degree published coverage figure, 5-inch ceiling-speaker format, back-can designation, and 25/70.7 V transformer. These are concrete comparison points for buyers matching a speaker to an existing design or equipment schedule.

The model identity is consistent across the supplied title and TOA product-page information. Multiple product images also provide angle, baffle-off, and side perspectives. No videos are supplied, and no additional acoustic or physical measurements are included in the source data.

Final Assessment

The TOA F-122CU2 is a focused choice when the documented requirements call for a full-range processed 5-inch ceiling speaker with a back-can, 25/70.7 V transformer, and wide dispersion. Its clearest published performance point is the 180-degree average dispersion from 1–4 kHz.

Selection should be based on those verified characteristics rather than assumptions about output, frequency range, dimensions, tap settings, or included mounting components. If the project depends on any specification not listed here, that value should be confirmed before purchase. Based strictly on the supplied data, this model offers a clearly identified configuration with a specific, frequency-bounded dispersion figure.