STICK-ON Series Mounting Rack-10 Modules

The RDL SR-10 is an all-steel mounting rack designed to hold up to 10 RDL STICK-ON modules on a backboard or another flat surface. Compatible modules attach using RDL detachable mounting tabs, while a built-in provision for cable harnessing supports a more organized installation. The SR-10 provides a focused mounting solution for consolidating multiple STICK-ON modules in one location.

Ideal Use Cases

The SR-10 is suited to installations that use several RDL STICK-ON modules and require a common mounting surface. Its capacity of up to 10 modules makes it appropriate when a single module position is insufficient or when multiple compatible modules need to be arranged together. The rack can be mounted to a backboard or another flat surface, providing flexibility when planning the installation location.

Because cable harnessing is considered in the rack design, the SR-10 is also a practical choice where connected module cabling needs to follow the mounting arrangement. Its purpose is clearly defined: support compatible modules, establish their position on a flat surface, and provide for harnessed cable organization.

Why Choose This Model

The SR-10 combines ten-module capacity, detachable-tab attachment, cable-harnessing provision, and all-steel construction in one mounting component. These documented characteristics allow the rack to address both module placement and cable organization without requiring modules to be positioned independently across the installation surface.

RDL detachable mounting tabs provide the specified attachment method for STICK-ON modules. This method is central to the SR-10 design and matches the compatible module series. The rack is therefore intended specifically for an installation built around RDL STICK-ON products rather than as an unspecified universal shelf or enclosure.

Installation and Integration

The SR-10 is designed for installation on a backboard or other flat surface. Once the rack location is established, up to 10 compatible RDL STICK-ON modules can be attached using RDL detachable mounting tabs. The source data describes installation as easy and identifies a provision for cable harnessing, allowing the module layout and associated cable paths to be considered together.

The detachable mounting-tab system defines how compatible modules interface with the rack. Cable harnessing provision supports routing cables in relation to the installed modules. No rack dimensions, mounting-hardware details, or required clearances are specified in the supplied data, so those factors should be confirmed against the intended surface and complete installation requirements.

Performance Highlights

For the SR-10, performance is defined by mounting capacity and construction rather than electronic specifications. The rack accommodates up to 10 RDL STICK-ON modules and uses all-steel construction. It supports installation on a backboard or comparable flat surface and provides for cable harnessing alongside the mounted modules.

The listed shipping weight is 1.86 lbs, and the package type is a cardboard box. Available documentation formats identified in the source data include a PDF datasheet and front panel diagrams in American and Metric DXF formats.

What Makes It Different

The SR-10 brings together four specific features: capacity for as many as 10 RDL STICK-ON modules, attachment with RDL detachable mounting tabs, flat-surface or backboard mounting, and provision for cable harnessing. This combination distinguishes it as a dedicated mounting rack for the STICK-ON series.

Its all-steel construction is also explicitly specified. Rather than adding unrelated functionality, the SR-10 remains centered on the mechanical requirements of positioning compatible modules and accommodating their cable harnessing within a defined rack-based arrangement.

Final Assessment

The RDL SR-10 is a purpose-specific choice for mounting up to 10 STICK-ON modules on a backboard or other flat surface. Its all-steel construction, detachable-tab module attachment, and cable-harnessing provision address the core requirements stated for this model. For installations based on compatible RDL STICK-ON modules, it offers a clearly defined way to group modules on one mounting rack.