Remote Audio Mixing Control-Stainless

Ideal Use Cases

The RDL DS-RC3 is designed for installations that need three-channel remote audio mixing control from one fixed location. Its three single-turn rotary controls place channel adjustment together on a compact stainless steel panel. It is suited to systems built around an RDL remote-controlled mixer equipped with the light blue color-coded control jack and an RJ45 remote-control port. Use it when the mixer and operator control point need to be separated through standard twisted-pair interconnection, or when access to three mixing controls is needed at a dedicated location away from the mixer.

Why Choose This Model

This model brings three channels to a single control location and connects directly to compatible RDL mixers. The straightforward layout is centered on single-turn rotary operation, keeping the panel dedicated to remote mixing adjustment. This DS-RC3 configuration has the stainless steel finish specified for the listing. Compatibility is clearly defined: the panel is intended for RDL remote-controlled mixers with the light blue color-coded control jack. That specific pairing provides a practical way to confirm whether the DS-RC3 matches an existing RDL mixer before ordering or installation.

Installation and Integration

The DS-RC3 mounts in a standard US electrical box. A cover plate is available separately, so it should be planned as a separate installation item rather than assumed to be included. The control connection is RJ45, while the connection to the mixer uses standard twisted-pair interconnection. The panel measures 4.1 inches (10.4 cm) high by 1.7 inches (4.33 cm) wide. Its stated depth is 1.44 inches (3.7 cm) without the knob and 2 inches (5 cm) with the knob. These measurements provide both the panel-body depth and the overall depth when the control knob is included. Before installation, confirm that the target mixer has the specified RDL remote-control interface and allow for the listed panel dimensions, electrical box, knob projection, and separately available cover plate.

Performance Highlights

The panel provides direct control of three audio-mixing channels through individual single-turn rotary controls. All three controls are placed at one location, giving the operator a consolidated control point for mixer adjustment. Its remote-control connection reaches the mixer through standard twisted-pair wiring and an RJ45 connector. The specified compatibility covers RDL remote-controlled mixers using the light blue color-coded control jack. The DS-RC3 therefore has a focused role as a remote control panel for a compatible mixer. The source information does not identify audio processing, amplification, wireless operation, or built-in speakers as panel functions.

What Makes It Different

The defining combination is a three-channel layout, one control location, single-turn rotary operation, a stainless steel finish, and direct control of supported RDL mixers through an RJ45 remote-control interface. Compatibility is identified not only by manufacturer but also by the light blue color-coded control jack used on the applicable RDL mixers. Installation is similarly well defined around a standard US electrical box, with the cover plate available separately. Listed supporting resources include a PDF specification sheet, American DXF front and rear panel diagrams, CAD material with an engineering functional block, and TIF high-resolution images. These resources provide additional model information for documentation and installation planning.

Final Assessment

Choose the DS-RC3 when the requirement is a stainless steel, three-channel remote control point for an RDL remote-controlled mixer with the specified interface. Its purpose is clearly defined: it puts three rotary channel controls at one location, connects to the mixer through standard twisted-pair interconnection, and fits a standard US electrical box. Confirm the mixer has the required light blue color-coded control jack, obtain a compatible cover plate separately if needed, and use the published measurements when planning box depth and finished clearance. For an RDL system that meets those requirements, the DS-RC3 delivers the documented remote-control arrangement in a compact panel format.