INDOOR SKU LSBF025-GDR

LSBF DVLED P2.5 TAA R Mitre Cut Indoor Cabinet 600Nit 1200x675x72 00 nit

Shipping Options at Checkout Warranty Terms Vary

Product Overview

The LG LSBF025-GDR is an indoor LSBF Series DVLED cabinet identified with a P2. 5 designation and 600-nit brightness.

$2,861.60

Shipping charges and warranty coverage vary by product and order. Review the applicable terms before purchase.

Available to Order

Available to order; contact us to confirm lead time

Shipping Options

Rates and available methods are shown at checkout

Available to order

Key Features

This model is suited to indoor commercial-display projects whose specifications explicitly call for an LSBF Series DVLED cabinet with the listed P2.5 designation and 600-nit brightness.
The R mitre-cut format makes this a configuration-specific cabinet rather than a generic substitute for every LSBF installation.
It should be selected when the cabinet orientation, mitre-cut geometry, dimensions, and LSBF025-GDR SKU match the project design.
No outdoor rating or environmental protection specification is supplied, so the documented application is limited to indoor LED signage.

The LG LSBF025-GDR is an indoor cabinet from the LSBF Indoor LED Series. The supplied product title identifies it as a DVLED cabinet with a P2.5 designation, 600-nit brightness, TAA designation, and an R mitre-cut configuration. Its listed dimensions are 1200 x 675 x 72, although the measurement units are not stated. The LG source identifies the base model and manufacturer part number as LSBF025.

Ideal Use Cases

This model is suited to indoor commercial-display projects whose specifications explicitly call for an LSBF Series DVLED cabinet with the listed P2.5 designation and 600-nit brightness. The R mitre-cut format makes this a configuration-specific cabinet rather than a generic substitute for every LSBF installation. It should be selected when the cabinet orientation, mitre-cut geometry, dimensions, and LSBF025-GDR SKU match the project design. No outdoor rating or environmental protection specification is supplied, so the documented application is limited to indoor LED signage.

Why Choose This Model

The LSBF025-GDR combines several clearly identified project-selection details in one SKU: an indoor DVLED format, P2.5 designation, 600-nit output, TAA designation, R mitre-cut construction, and listed 1200 x 675 x 72 cabinet dimensions. These details allow integrators and purchasing teams to distinguish it from cabinets with another pitch, brightness level, geometry, or SKU. The distinction between SKU LSBF025-GDR and model or MPN LSBF025 should be retained on quotes, purchase orders, and project documentation to reduce ambiguity.

Installation and Integration

This product is presented as an indoor LED cabinet, but the supplied information does not specify its mounting method, weight, power requirements, voltage, signal connections, controller compatibility, or required accessories. Installation planning should therefore be based on the exact LSBF025-GDR configuration and the referenced LSBF Series specification sheet. Before procurement, confirm the measurement units for the listed 1200 x 675 x 72 dimensions and verify that the R mitre-cut format corresponds to the required position within the intended display layout. Structural support, power distribution, data routing, control equipment, and any adjoining cabinets are not described in the source data.

Performance Highlights

The stated brightness is 600 nit, and the product is identified by the P2.5 designation. These are the only supplied image-performance details. Native resolution, cabinet resolution, contrast ratio, refresh rate, color gamut, grayscale processing, viewing angle, HDR support, and brightness uniformity are not provided. The listing therefore supports selection by its documented series, indoor DVLED category, pitch designation, and brightness figure, but it does not support broader image-quality comparisons without additional technical documentation.

What Makes It Different

The defining feature of this SKU is its specific combination of LSBF Series identity and R mitre-cut cabinet configuration. The title also distinguishes it through the P2.5, TAA, indoor, 600-nit, and 1200 x 675 x 72 designations. This precise combination matters when ordering a component for a planned LED installation, because a cabinet from the same series may not share the same geometry or full SKU. The supplied gallery URLs use an LSBF012-GD path rather than the LSBF025-GDR identifier, so they should not be treated as definitive product imagery for this exact configuration.

Final Assessment

The LG LSBF025-GDR is a specialized indoor LSBF DVLED cabinet defined by its P2.5 designation, 600-nit brightness, TAA designation, R mitre-cut format, and listed dimensions. It is a focused choice for projects already designed around these characteristics and the LSBF025 model family. Buyers should verify the dimension units and obtain the missing electrical, mechanical, control, mounting, and warranty details before finalizing an installation. For accurate fulfillment, specify LG model and MPN LSBF025 together with SKU LSBF025-GDR.

Payment Options

All major credit cards
PayPal at checkout
Apple Pay at checkout
Google Pay at checkout
Supports recurring payments
Wire transfer for business

Why Buy from AVN

Warranty Information

Coverage varies; confirm the terms before purchase

Returns on Most Items

30-day window; conditions and exclusions apply

Product Details

Condition and specifications are shown per listing

Secure Connection
HTTPS/TLS protected
30-Day Returns
Most eligible items
Quote Support
Pricing confirmed in quote
Warranty Information
Terms vary by product
Shipping Options
Rates shown at checkout