US Size 4K60 4:2:0 2 HDMI to HDBaseT Wall Plate

Ideal Use Cases

The Kramer WP-211T/US is designed for installed AV systems that need two HDMI sources to share a long-reach HDBaseT extension link. Its US-D-size wall-plate form factor places source connections at the point of use while integrating the switching and transmission functions into the same device. This configuration is well suited to spaces where users regularly connect or activate different HDMI sources and the system must select between them without continuous manual routing.

Automatic switching is based on active video signal detection. Installers can choose between priority and last-connected switching schemes, allowing operation to follow the intended source hierarchy or respond to the most recently connected active signal.

Why Choose This Model

The WP-211T/US combines a two-input HDMI wall interface, automatic source selection, and HDBaseT transmission. It supports 4K60 4:2:0 HDMI video with a listed 60Hz refresh rate and 8.91Gbps bandwidth. These clearly defined performance specifications make it possible to match the transmitter to the required video signal rather than relying on a general 4K designation.

Its PoE-powered design supports an integrated installation approach, while the supplied US configuration includes white and black Decora design frame sets. This gives the installer a choice of finish without changing the core transmitter or switching functionality.

Installation and Integration

The US model measures 6.98cm wide by 3.70cm deep by 11.43cm high, or 2.75 by 1.46 by 4.50 inches. It is identified as a US-D-size wall-plate switcher and transmitter. The two HDMI source connections feed the automatic switching stage, and the selected signal is transmitted through the long-reach HDBaseT extension link.

During commissioning, the installer selects either priority or last-connected switching according to the required workflow. Because switching decisions are driven by active video signal detection, the operating state of each connected source determines when an automatic change occurs. The selected HDBaseT cabling and receiving equipment should be matched to the system design and the specified 4K60 4:2:0 signal profile. Transmission distance and receiver requirements are not specified in the supplied product data.

Performance Highlights

The WP-211T/US handles 4K HDMI signals at up to 60Hz with 4:2:0 color sampling. Its listed bandwidth is 8.91Gbps. This combination defines the transmitter’s stated video performance and makes it suitable for systems built around that specific 4K60 format.

Signal handling is paired with automatic source management. Rather than requiring the user to select an input every time a source becomes active, the unit detects active video and follows the configured switching scheme. This connects the stated video capability directly to a practical source-selection workflow.

What Makes It Different

The defining feature is the integration of two-source automatic switching with a long-reach HDBaseT transmitter in a wall-plate format. Priority switching can be used when one HDMI source should take precedence, while last-connected switching allows the latest active connection to become the selected source. Both modes use active video signal detection as the basis for switching.

The model designation WP-211T/US(W/B) also identifies the specific physical configuration: a US-D-size unit supplied with white and black Decora design frame sets. This distinguishes it from the separately listed EU and UK version and helps ensure that the selected model matches the intended wall-plate format.

Final Assessment

The Kramer WP-211T/US is a focused choice for an installed system requiring two HDMI sources, automatic signal-based switching, and HDBaseT extension from a US-D-size wall plate. Its documented performance includes 4K60 4:2:0 video, a 60Hz refresh rate, and 8.91Gbps bandwidth. Priority and last-connected modes provide two practical switching behaviors, while PoE power and the white and black Decora frame sets support a coordinated installation. It is best matched to projects whose required video format and wall-plate dimensions align with these stated specifications.