HDMI (M) to HDMI (M) Cable with Ethernet - 65'

The Kramer C-HM/HM/PRO-65 is a 65-foot HDMI cable with a male HDMI connector at each end and an Ethernet designation. Its documented configuration provides three clear selection points: HDMI connectivity, matching male connectors, and a 65-foot cable length. The supplied data does not identify the HDMI version, bandwidth, supported resolutions, refresh rates, audio formats, or construction materials, so those capabilities should not be assumed.

Ideal Use Cases

This model is appropriate when an installation specifically requires a 65-foot HDMI male-to-male cable with Ethernet. The connector arrangement is intended for equipment with compatible HDMI inputs and outputs that accept male HDMI plugs. The extended cable length can accommodate equipment separated by a substantial route, but the complete route should be measured before installation. The source data does not identify particular markets, room types, display technologies, or equipment models as approved applications.

Because no wall-use, plenum, outdoor, or other installation rating is provided, suitability for regulated or concealed spaces must be confirmed separately. Compatibility should likewise be evaluated against the requirements of the connected HDMI equipment.

Why Choose This Model

The principal reasons to select the C-HM/HM/PRO-65 are its defined 65-foot length, HDMI male connectors at both ends, Ethernet designation, and traceable Kramer product identifier. This combination makes the model straightforward to identify when a project specification or replacement list calls for SKU C-HM/HM/PRO-65.

Kramer’s supplied manufacturer information also states that its products include a Global Warranty and technical support. No warranty duration, coverage terms, or support conditions are included in the provided product data. Those details should be confirmed before purchase when warranty requirements are part of a project specification.

Installation and Integration

Before routing the cable, verify that both connected devices provide the appropriate HDMI receptacles and that a 65-foot cable reaches the required endpoints without placing tension on either connector. The route should also allow sufficient clearance around the equipment connections. Connector dimensions, cable diameter, bend radius, jacket material, and cable flexibility are not stated.

The source does not indicate whether the cable is active, passive, or directional. It also does not document requirements for repeaters, extenders, adapters, or supplemental power. Installation planning should therefore rely on the connected equipment requirements and any project-specific signal-distance criteria rather than assumptions based solely on cable length.

Performance Highlights

The confirmed functional description is HDMI male-to-male connectivity with Ethernet across a stated length of 65 feet. No numerical bandwidth, data rate, maximum resolution, color format, refresh rate, or audio capability is supplied. Support for HDR, HDCP, ARC, eARC, 4K, 8K, 3D, or specific HDMI generations is also not documented.

For accurate system qualification, this model should be evaluated using only its confirmed connector format, Ethernet designation, length, and SKU until additional manufacturer performance documentation is available.

What Makes It Different

This listing is distinguished by a precise physical configuration rather than a documented set of advanced format claims. The 65-foot length and male connector at each end are explicitly identified, reducing ambiguity when selecting by reach and connector gender. The Ethernet designation is also part of the supplied product title.

The available information does not establish differences in shielding, conductor material, connector plating, strain relief, certification, signal equalization, or environmental rating. It would therefore be inaccurate to position the cable against alternatives using any of those characteristics.

Final Assessment

The Kramer C-HM/HM/PRO-65 addresses a clearly defined connection requirement: a 65-foot HDMI male-to-male cable with Ethernet. It is a suitable candidate when those exact physical details and the listed Kramer SKU match the installation plan. Buyers who require a particular HDMI version, resolution, bandwidth, compliance rating, or construction specification should confirm those details before ordering because they are absent from the provided source data.