The black JBL Control 60PS/T is a pair of passive pendant subwoofers designed to deliver low-frequency reinforcement for foreground and background music reproduction in restaurants, retail stores, coffee shops, and fitness facilities. Capable of handling 300W of continuous long-term program power, the Control 60PS/T’s 8″ long-excursion driver can produce a frequency range of 42 to 350 Hz (-10 dB) and a 113 dB peak maximum SPL.

The integrated 110W multi-tap transformer enables 70V, 100V, or 8-ohm operation and the passive crossover provides high-pass-filtered outputs for two or four satellite speakers. Removable locking Euroblock connectors simplify the process of wiring the input, loop thru, and satellite outputs.

The high-impact polystyrene enclosure boasts an IP44 splash-proof rating in addition to its Mil-STD-810 compliance for resistance to humidity, salt spray, temperature & UV damage. The Control 60PS/T is supplied with suspension cable systems for safe hanging installation.

• 8″ Long-Excursion Driver
• 300W Long-Term Program Power Handling
• 42 to 350 Hz Frequency Range (-10 dB)
• Passive Crossover for 4 Satellites
• Integrated 110W Multi-Tap Transformer
• Supports 70V, 100V, or 8-Ohm Operation
• IP44 Splash-Proof Rating
• Removable Locking Euroblock Connectors
• Includes Hanging Hardware

Specifications

System:
Frequency Range (-10 dB)1 : 42 Hz – 350 Hz
Frequency Response (± 3 dB)1 : 55 Hz – 125 Hz
Power Capacity2 : 300 Watts Continuous Program Power, 100 hrs 150 Watts Continuous Pink Noise, 100 hrs
Nominal Sensitivity (2.83V/1m): 88 dB
Rated Maximum SPL: 107 dB @ 1 m (3.3 ft) average, 113 dB peak
Rated Impedance: 8 ohms
Transformer Taps: 110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8 setting) on top terminal panel
Transformer Insertion Loss: 0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110W
Standalone Hookup: Connect to Input connector; built-in low-pass filter permanently engaged.
Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.
Subwoofer-Satellite Hookup: For either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant),
Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16) regardless whether tap selector is set to low-Z or 70V/100V. Loop Out in parallel with Input connector (pre
low-pass filter) for sending to additional speakers

Transducer: 200mm (8 in) polypropylene-coated paper cone with butyl rubber
surround, 50 mm (2 in) high-temperature copper voice coil, vented
fiberglass resin voice coil former.

Enclosure:
Enclosure Material: High impact polystyrene
Grille: Zinc-plated steel grille with powder-coat finish, foam backing (grille and
grille backing are removable for painting)
Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44
capability per IEC 529 – splash-proof rating
Termination: Six removable locking 2-pin connectors with screw-down terminals.
Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2
).
Rubber terminal covers included.
Suspension: Two identical suspension cable systems (one as main suspension cable
and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2
mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable
with spring-clips for clipping onto the loudspeaker bracket and Gripple™
brand adjustable-height cable fasteners for infinitely adjustable height.
Cable has SWL rating of 45 kg (99 lb).
Safety Agency: Speaker listed per UL1480 (UEAY), transformer registered per UL1876. In
accordance with IEC60849/EN60849. Suspension system and Gripple®-
brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class
3426-01 & Class 3426-81.
Dimensions: 333 mm (13.1 in) diameter, 344 mm (13.6 in) height to top of cabinet.
369 mm (14.5 in) to top of suspension bracket.
Net Weight: 7.6 kg (16.7 lb)
Shipping Weight: 17.6 kg (38.7 lbs) per pair-packed carton
Included Accessories: Two suspension cable systems (see “suspension”, above), six removable
locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors.
Optional Accessories: MTC-PC60 full top panel / terminal cover. Wire access holes in plastic
cover to be drilled by installer to suit the number and dimensions of
wire.
Colors: Available in black or white (-WH). Paintable.