Discovery HDBT Receiver-70m

The Hall Research Discovery HT-DSCV-70-RX is an HDBT wall plate receiver with defined transmission ranges for 4K and 1080p video. It supports 4K@60 at distances up to 131 feet/40 meters and 1080p@60 at distances up to 230 feet/70 meters. RS-232 pass-through control and two documented power arrangements provide clear options for system integration.

Ideal Use Cases

This receiver is suited to HDBT system designs that require a wall plate receiver at the destination. For a 4K@60 installation, the specified transmission distance is up to 131 feet/40 meters. When the required format is 1080p@60, the supported distance extends to 230 feet/70 meters. These separate ratings make the model relevant to both shorter 4K routes and longer 1080p routes.

The HT-DSCV-70-RX also fits systems that need RS-232 pass-through control. It is especially applicable when paired with the AT-DSCV-D1111, since POH is provided in that configuration. A standalone deployment is also identified, provided that a separate power supply is used.

Why Choose This Model

The primary reason to select this model is its clearly stated combination of video format, refresh rate, and transmission distance. The 70-meter designation applies to 1080p@60 operation, while 4K@60 is specified for up to 40 meters. This distinction allows the receiver to be evaluated against the actual resolution and route length required by the installation instead of relying on a single distance figure.

RS-232 pass-through adds a disclosed control capability alongside the video transmission specifications. The documented pairing with the AT-DSCV-D1111 also establishes a specific route for POH operation. For installations that do not use that paired configuration, standalone operation remains available with a power supply that must be obtained separately.

Installation and Integration

Installation planning should begin by matching the intended video format to the correct distance limit. A 4K@60 signal route should remain within 131 feet/40 meters. A 1080p@60 route may extend to 230 feet/70 meters. The longer 70-meter figure should not be applied to the listed 4K@60 performance, since the source data provides separate maximum distances for the two formats.

Power planning depends on the selected configuration. When the receiver is paired with the AT-DSCV-D1111, POH is provided. When it is installed as a standalone receiver, a power supply is required and is not included. Accounting for that supply during system design avoids assuming that standalone power hardware is part of the product package.

For control integration, the receiver provides RS-232 pass-through. No additional control protocols, connector specifications, cable requirements, or power-supply specifications are stated in the supplied product data.

Performance Highlights

The HT-DSCV-70-RX provides two concrete performance targets: 4K@60 transmission up to 131 feet/40 meters and 1080p@60 transmission up to 230 feet/70 meters. Both ratings include the resolution, refresh rate, and maximum distance, making them directly useful when defining the receiver endpoint of an HDBT system.

The published information does not specify HDR support, HDCP compatibility, HDMI version, color formats, or other image-processing features. Its documented performance centers on the two resolution-and-distance ratings, RS-232 pass-through, and the available paired or standalone power arrangements.

What Makes It Different

This model combines a wall plate receiver format with explicitly separated 4K and 1080p distance ratings. The difference between 40-meter 4K@60 operation and 70-meter 1080p@60 operation is an important part of the product definition. It communicates exactly how the maximum range changes with the selected video format.

The power configuration is similarly specific. The source identifies the AT-DSCV-D1111 by model number as the companion product that provides POH when paired with the receiver. It also documents a standalone option while clearly stating that the required standalone power supply is not included. RS-232 pass-through completes the stated feature set without implying unlisted network, wireless, audio, or processing functions.

Final Assessment

The Hall Research HT-DSCV-70-RX is a focused choice for an HDBT wall plate receiver application requiring 4K@60 transmission up to 40 meters or 1080p@60 transmission up to 70 meters. Its RS-232 pass-through capability supports installations with a stated control requirement. Pairing it with the AT-DSCV-D1111 provides POH, while standalone use requires a separately obtained power supply. Selection should be based on the required resolution, refresh rate, route length, control needs, and planned power arrangement.