PLATINUM DESIGN SERIES 64IN TRIPOD MIC STAND AND BOOM KIT

The AtlasIED TB3664 Platinum Design Series kit combines the T3664 tripod microphone stand with the B2237 boom for standing instrumentalists and performers. Its adjustable stand height spans 36 to 64 inches (914 to 1626 mm), while the boom extends from 24 to 39 inches. A 25-inch (653 mm) base spread defines the tripod footprint, and the stand is finished in Ebony.

Ideal Use Cases

The TB3664 is designed for standing instrumentalists and performers who need both vertical height adjustment and horizontal boom positioning. The stand-height range accommodates microphone placements from 36 inches through 64 inches, making it suitable when the microphone position must be adapted to the performer or instrument. The adjustable 24-to-39-inch boom provides additional reach beyond the center of the tripod, allowing the microphone position to be changed while the base remains in place.

This combination is particularly relevant when a straight stand alone would not provide the desired reach. The boom can be set closer to the stand or extended farther outward within its specified range. The 25-inch base spread should be considered when planning available floor space around a standing performer or instrumentalist.

Why Choose This Model

The defining advantage of the TB3664 is that it packages two identified Platinum Design Series components: the T3664 tripod and the B2237 boom. Buyers receive a matched stand-and-boom configuration rather than a tripod stand by itself. This pairing provides two separate adjustment ranges: 36 to 64 inches for stand height and 24 to 39 inches for boom length.

Those dimensions make the model easy to evaluate before purchase. Users can compare the required microphone height, desired horizontal reach, and available 25-inch tripod footprint directly against the published measurements. The Ebony tube finish also gives the complete stand a clearly specified appearance.

Installation and Integration

Integration begins with allocating enough floor area for the 25-inch (653 mm) base spread. Once positioned, the T3664 stand can be adjusted within its 36-to-64-inch height range. The B2237 boom then supplies 24 to 39 inches of adjustable reach for refining microphone placement relative to the tripod.

The stand and boom ranges can be considered together when planning a setup. Vertical positioning is handled by the T3664 tripod, while horizontal reach is handled by the B2237 boom. This division makes it possible to select a suitable stand height first and then use the boom range to place the microphone closer to the intended performer or instrument position. No electronic connections or powered components are specified for this kit.

Performance Highlights

• Adjustable stand height: 36 to 64 inches (914 to 1626 mm).
• Adjustable boom length: 24 to 39 inches.
• Tripod footprint: 25-inch (653 mm) base spread.
• Included components: T3664 tripod microphone stand and B2237 boom.
• Finish: Ebony.
• Shipping weight: 5.00 pounds (2.27 kilograms).
• Warranty: 60 months from the date of purchase.

Together, the specified height and boom ranges define the kit’s positioning capabilities. The stand can cover a 28-inch vertical adjustment span, while the boom can cover a 15-inch length adjustment span. These figures provide concrete guidance for determining whether the TB3664 fits a particular microphone-positioning requirement.

What Makes It Different

The TB3664 is distinguished by its complete tripod-and-boom format and its stated purpose for standing instrumentalists and performers. It is not presented as only a stand or only a boom: the kit explicitly includes the T3664 tripod and B2237 boom. That combination joins a maximum stand height of 64 inches with a boom that extends to 39 inches.

The published metric and imperial stand-height and base-spread measurements also support straightforward space planning. Buyers can account for both the 914-to-1626-mm height range and the 653-mm base spread when determining fit. The 60-month warranty period adds a clearly defined term beginning on the purchase date.

Final Assessment

The AtlasIED TB3664 is a purpose-defined Platinum Design Series microphone stand kit for standing instrumentalists and performers. Its central specifications are a 36-to-64-inch stand-height range, a 24-to-39-inch boom range, and a 25-inch tripod base spread. With the T3664 tripod and B2237 boom included, the kit provides a single configuration for vertical and horizontal microphone positioning. The Ebony finish, 5.00-pound shipping weight, and 60-month warranty complete the available product details.