Crown DCi 2|300N Networked Power Amplifier

The DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology. This amplifier is EN 54-16 Compliant for life safety applications.

Main Features

• TRUE RACK DENSITY – Power points of 300W or 600Win 2-/4-/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.
• DIRECT DRIVE CONSTANT VOLTAGE – Save money by using smaller gauge wiring to drive the speakers using either 70Vrms or 100Vrms. With no need for a step-up transformer at the output, the DCi produces higher audio quality much more efficiently.
• CHANNEL INDEPENDENT HI-Z/LOW-Z SELECTION –Drive either one or two speakers in low-Z mode, or literally hundreds of speakers in high-Z mode (70Vrms or100Vrms). This means better design flexibility since DCi powers all loads on a channel-by-channel basis.
• ANALOG & DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.
• NETWORK MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.
• PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.
• DIGITAL SIGNAL PROCESSING – DSP capabilities include the following: – LevelMAX Limiters – Input/Output EQ – Crossover – Delay – Matrix Mixer – Speaker Line Monitoring
• EN 54-16 Compliant for Life Safety Applications – Part 16 of the European Union’s (EU) EN 54 standard for fire detection and alarm systems has a specific requirement for voice alarms, which output messages in the form of a voice message rather than a traditional siren. This amplifier is certified as part of an EN 54-16 VACIE*, meeting the stringent requirements of a life safety system to serve the needs of hospitality, large venue and other markets.

General Information
Name: Crown DCI2X300N-U-USFX DCi 2|300N DriveCore 2-Channel Network Power Amplifier with BLU Link, 70V/100V 300W at Ohm, Harman International Industries, Inc, Crown by Harman
Category: Crown by Harman, Pro AV, Commercial Audio, Pro Amplifiers
UPC Code: 871015007199
Country of Origin: United States. Country of origin is subject to change.

Specifications

ADI Part Number 5C-DCI2300N
Brand Name Crown
Manufacturer Harman International Industries, Inc
Manufacturer Part Number DCI2X300N-U-USFX
Product Line DriveCore Install
Product Model 2|300N
Product Name DriveCore Install DCi 2|300N Amplifier
Product Series DCi
Product Type Amplifier
Weight (Approximate) (g) 8530
Audio Channels 2
Impedance 8 ohms
Impedance (Ohm) 8
Maximum Frequency Response (Hz) 20000
Minimum Frequency Response (Hz) 20