NEC X464UNS-2 MultiSync 46" LCD Video Wall Display

NEC
Condition:
New
$2,499.00
Shipping:
Free Shipping
(No reviews yet) Write a Review
SKU:
X464UNS-2
UPC:
805736062656
MPN:
X464UNS-2
Availability:
In stock, ship same-day or until 48 Hrs

Description

NEC X464UNS-2 Overview

The MultiSync 46" LCD Video Wall Display from NEC features native UHD daisy chaining that enables the user to create UHD video walls with either a single UHD image or four different Full HD sources. With an advanced set of intelligent features, it is easy to install and operate. The FrameComp feature supports a seamless appearance, crucial for fast moving content, creating one image by synchronizing the content across the entire video wall. The NEC heat management system enables the user to monitor and control the heat inside the display.

You can upgrade the power of your display at any time while seamlessly integrating one of various slot-in PCs, signal interfaces, and other OPS compatible products without the need for external cables or devices. with NaViSet Administrator 2, it allows you to manage all your connected display devices from a centralized location.

Compelling Image Presentation

Hardware color and brightness calibration secures a consistent image presentation over the entire video wall

Continous Workflow

Reliable and secure with 24/7 operation

Easy Setup

Auto TileMatrix offers time and cost savings during installation and allows you to configure just one display in order to complete the set up for the entire wall

Multi-Display Management Software

Free Download of NaViSet Administrator 2 allows you to manage all your connected display devices from a centralized location 

Additional Features

  • Auto ID assignment
  • Auto tiling function
  • Automatic alarm e-mails
  • DICOM support
  • Frame comp
  • HTTP server
  • Image flip
  • Intelligent wireless data (based on NFC)
  • NaViSet administrator 2
  • Point zoom function
  • Programmable 10-bit LUT with three memory banks
  • Sticky note function in OSD
  • Super slim bezel with 3.7mm between contents and 3.5 mm bezel width
  • TileMatrix
  • User readable log function
  • Black front bezel and back cabinet

NEC X464UNS-2 Specs

Display
Panel Technology S-PVA with direct LED backlight
Screen Size 46" / 116.8 cm 
Native Resolution 1920 x 1080 at 60 Hz
Supported Resolutions DisplayPort and HDMI: 3840 x 2160 at 24/30 Hz, 1920 x 1080, 1600 x 1200, 1360 x 768, 1280 x 1024, 1280 x 768, 1080i, 1080p, 1024 x 768, 800 x 600, 720p at 50/60 Hz, 640 x 480, 576p at 50 Hz, 480p at 60 Hz

HDMI Only: 4096 x 2160 at 24 Hz, 3840 x 2160 at 25 Hz, 1360 x 768, 576i (50 Hz), 480i at 60 Hz
Active Screen Area 40 x 22.6" / 101.8 x 57.3 cm 
Aspect Ratio 16:9
Brightness 700 cd/m²
420 cd/m² (Eco)
Contrast Ratio 3500:1 (typical)
Viewing Angle Horizontal/Vertical: 178°/178° (typical at contrast ratio 10:1)
Response Time 8 ms (typical)
Refresh Rate 60 Hz
Haze Level 25%
Orientation Face Up, Landscape, Portrait
Connectivity Input Video Analog: 1 x D-sub 15-pin
Input Video Digital: 1 x DisplayPort (with HDCP), 1 x DVI-D (with HDCP), 1 x HDMI (with HDCP)
Input Audio Analog: 2 x 3.5 mm jack
Input Audio Digital: 1 x DisplayPort, 1 x HDMI
Input Control: 1 x LAN 100 Mb, 1 x Remote Control (3.5 mm jack), 1 x RS232
Output Video Digital: 1 x DisplayPort out (loop through: DisplayPort, DVI-D, HDMI, interface extension slot, OPS)
Output Audio Analog: 1 x 3.5 mm jack
Output Control: 1 x LAN 100 Mb
Slots Slot Technology: Open pluggable specification (NEC / Intel OPS standard)
OPS Maximum Power Consumption: 10A/61W
Slot Technology: Analog and digital interface extension (NEC standard)
Temperature Sensor Three integrated sensors (triggered actions programmable)
Sensor NFC Sensor: Integrated with 0.8" / 2 cm range (free NEC Android App required)
Audio Optional speakers (15 W + 15 W)
Power Consumption 150 W
120 W Eco
Power Savings Mode < 1 W
< 0.5 W (ECO Standby)
Power Management VESA DPMS
Operating Temperature 32 to 104°F / 0 to 40°C 
Operating Humidity 20 to 80%
Bezel Width Bottom/Right: 1.2 mm
Top/Left: 2.3 mm
Content to Content: 3.7 mm
VESA Mounting 300 x 300 mm (FDMI), 4 holes, M6
Ingress protection IP40 (front), IP20 (back)
Certification and Compliance C-tick, CE, FCC Class A, PSB, RoHS, TÜV GS, UL/C-UL or CSA, VCCI
Dimensions Without Stand: 40.2 x 22.7 x 4" / 102.2 x 57.7 x 10.2 cm
Weight Without Stand: 43.9 lb / 19.9 kg
Packaging Info
Package Weight 56.5 lb
Box Dimensions (LxWxH) 47.5 x 29.5 x 11"
View AllClose

Warranty Information

1 Year Parts & Labor Manufacture Warranty
View AllClose