Active or Passive Passive
Number of Included Speakers 2
Speaker Configuration 2-Way
Power Handling For 2 Hours: 30 W RMS
Recommended Amplifier Power 60 W
Constant Voltage / Transformer Taps 70 V: 30 / 15 / 7.5 / 3.7 / 1.9 W or 8 Ohms Bypass 100 V: 30 / 15 / 7.5 / 3.8 W or 8 Ohms Bypass
Impedance 8 Ohms (Transformer Bypassed)
Transformer Wattage 30 W
Enclosure Type Bass-Reflex
Shielded No
HF Driver 1 x 1″ / 2.54 cm Aluminum Dome Tweeter
HF Voice Coil 1″ / 2.54 cm
LF Driver 1 x 6.5″ / 16.51 cm Polypropylene Woofer
LF Voice Coil 1″ / 2.54 cm
Frequency Range 60 Hz to 20 kHz -10 dB
Maximum SPL 101 dB (Continuous) 107 dB (Peak)
Sensitivity 86 dB SPL
Coverage Angle 130 (Conical)
Directivity 6 (Directivity/Q Factor) 8 dB (Directivity Index)
Maximum Input Voltage 15.5 V RMS
I/O Connectors 1 x Euroblock 4-Pole Speaker Input/Thru (Removable)
Maximum Wire Gauge 18 AWG
Water / Weather Resistance Water Resistant
IP Rating IP44
Operating Temperature -4 to 122 F / -20 to 50 C
Color White
Mounting 1 x Bracket Point (Each Side)
Construction Material ABS, Metal Grille
Dimensions 11.9 x 8.5 x 7.8″ / 30.23 x 21.59 x 19.81 cm
Weight 8.3 lb / 3.8 kg (Each Speaker)
Package Weight 18.8 lb
Box Dimensions (LxWxH) 15.8 x 11.9 x 9″
QSC AC-S6T Overview The white AcousticCoverage Series QSC AC-S6T is a pair of transformer-equipped 6.5″ surface-mount loudspeakers voiced to deliver enhanced clarity in the vocal range, making them suitable for 70/100V or 8-ohm operation in a variety of paging, A/V conferencing, and background music applications.
QSC AC-S6T Overview Outfitted with a 6.5″ polypropylene woofer and a 1″ aluminum dome tweeter in a UV-treated ABS enclosure with a ported baffle, the AC-S6T offers broad 130 conical coverage while providing a frequency range of 60 Hz to 20 kHz (-10 dB). The speaker is capable of handling 30W RMS and producing a peak maximum SPL of 107 dB.
The AC-S6T utilizes a 4-pole Euroblock connector on the rear panel for easy input and loop-thru wiring. A yoke bracket is included for simplified surface-mount installation.
QSC AC-S6T Overview High-quality transducers provide increased clarity through the critical voice range and improved musicality often not seen in typical BGM-class products 6.5″ polypropylene cone transducer with butyl rubber surround and 1″ aluminum dome tweeter 130 of conical coverage reduces the number of loudspeakers required for even coverage in close proximity
Tuned for added musicality and low-frequency extension down to 60 Hz (-10 dB)
QSC AC-S6T Overview Low-saturation, low-loss 70/100V transformer with 8-ohm bypass and rear-panel tap selector 4-pole Euroblock connector with loop-thru wiring located the rear of the enclosure
QSC AC-S6T Overview Advanced voicing filter sets using QSC Intrinsic Correction are available through either Q-Sys processing or CXD amplifier platforms (available separately) QSC AC-S6T Specs Speaker Active or Passive Passive Number of Included Speakers 2 Speaker Configuration 2-Way
Power Handling For 2 Hours 30 W RMS Recommended Amplifier Power 60 W
Constant Voltage / Transformer Taps 70 V 30 / 15 / 7.5 / 3.7 / 1.9 W or 8 Ohms Bypass 100 V: 30 / 15 / 7.5 / 3.8 W or 8 Ohms Bypass Impedance 8 Ohms (Transformer Bypassed) Transformer Wattage 30 W Enclosure Type Bass-Reflex Shielded No Drivers HF Driver 1 x 1″ / 2.54 cm Aluminum Dome Tweeter HF Voice Coil 1″ / 2.54 cm LF Driver 1 x 6.5″ / 16.51 cm Polypropylene Woofer LF Voice Coil 1″ / 2.54 cm Performance
QSC AC-S6T Overview Frequency Range 60 Hz to 20 kHz -10 dB Maximum SPL 101 dB (Continuous) 107 dB (Peak) Sensitivity 86 dB SPL Coverage Angle 130 (Conical) Directivity 6 (Directivity/Q Factor) 8 dB (Directivity Index)
QSC AC-S6T Overview Maximum Input Voltage 15.5 V RMS Connectivity I/O Connectors
1 x Euroblock 4-Pole Speaker Input/Thru (Removable) Maximum Wire Gauge 18 AWG Environmental Water / Weather Resistance Water Resistant IP Rating IP44
QSC AC-S6T Overview Operating Temperature -4 to 122 F / -20 to 50 C Physical Color White Mounting 1 x Bracket Point (Each Side) Construction Material ABS, Metal Grille Dimensions 11.9 x 8.5 x 7.8″ / 30.23 x 21.59 x 19.81 cm Weight 8.3 lb / 3.8 kg (Each Speaker) Packaging Info Package Weight 18.8 lb
QSC AC-S6T Overview Box Dimensions (LxWxH) 15.8 x 11.9 x 9″
SKU AC-S6T-WH
