Crown Audio CDi 2|1200 2-Channel DriveCore Series Power Amplifier

Retail: $2,766.31
— You save $316.32
Free Shipping
(No reviews yet) Write a Review
CDi 2X1200
CDi 2X1200


Audio professionals in search of a cost-effective professional audio amplifier will be impressed with the Crown Audio CDi 2|1200, a 2-Channel DriveCore Series power amplifier that utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 2|1200 offers streamlined functionality for most small- to medium-sized installations such as restaurants, retail stores, and more.

The amplifier is capable of driving up to 70/100 Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 2|1200 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs.

  • DriveCore Technology: Patented DriveCore integrated circuit combines hundreds of discrete circuits into one chip for better performance, lower power consumption, and improved reliability
  • Supports configuration and control using HiQnet Audio Architect
  • Monitoring and control over TCP/IP
  • Color LCD and front-panel user interface for amplifier configuration, control, and monitoring
  • Programmable GPIO (general purpose input/output) control port
  • Digital signal processing (input/output EQ filters, crossover, input/output delay, LevelMAX limiters)
  • Support for importing of FIR filter coefficients
  • 20 device presets—1 factory and 19 user
  • 96 kHz/32-bit floating-point signal processing
  • Universal power supply with PFC for reduced current draw and industry-leading efficiency
  • Power saving modes
  • Remote power off—Sleep mode activated via AUX port
  • 70/100Vrms direct drive
  • Each channel independently configurable for low-Z or high-Z operation
  • Advanced protection circuits—amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over/undervoltage, and high-frequency overload
  • Three-year, no-fault transferable warranty—your investment is fully protected
  • Complies with GreenEdge by HARMAN—environmentally friendly practices in design, manufacturing, and packaging complement energy-efficient operation
  • Support for BSS Audio Soundweb Contrio Ethernet wall controllers
  • Included speaker tuning for various JBL speaker models
Network Control and Monitoring
Through HARMAN’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.
Onboard Digital Signal Processor in each amplifier allows for custom configuration and includes these integrated features:


  • Input Router
  • Input Delay—up to 1000ms
  • Input Parametric EQ—8 band
  • Crossover
  • Output Parametric EQ—8 band
  • Output Delay—up to 100ms
  • LevelMAX Limiter
Direct Drive 70/100 Vrms Output
Each output channel is capable of providing either 70 or 100V for high-impedance applications.
Front-Panel Interface
Completely configure the amplifier using an intuitive front-panel interface.
GPIO / Aux Port
Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.
Pre-Loaded Speaker Tunings
For quicker and easier set up and installation.
View AllClose

Warranty Information

1 Year Parts & Labor Manufacture Warranty
View AllClose