Klipsch THX-6000-LCR Overview
Enjoy versatile placement options with the right-oriented Klipsch THX-6000-LCR-R 2-Way LCR Speaker. It features 1/4"-20 bolt holes on the back for wall or ceiling mounting with a compatible mount and can be used at any position in a home theater system – in the front at the left, center, or right position, or as a surround channel. When used as half of a stereo pair, the THX-6000-LCR-R should be installed as the right channel due to its tweeter placement.
The THX-6000-LCR-R uses a 1" titanium dome tweeter mated to a 90 x 60° Tractrix horn for enhanced highs, and two 6.5" Cerametallic anodized-aluminum cone woofers for mids and lows down to 48 Hz. The THX-6000-LCR-R accepts up to 150W of RMS power from your amplifier.
THX Ultra2-Certified
Designed primarily for front left, center, or right reproduction in high-performance home theaters, the THX-6000-LCR-R can also be used as a surround channel or in a combination home theater/music system. It's rear-panel 1/4"-20 threads make it compatible with wall or ceiling speaker mounts rated for 40 lb or higher.
Right-Oriented LCR Design
While the THX-6000-LCR-R can be used as either a left, center, or right speaker, when used as half of a stereo pair, it should be installed as the right channel due to the positioning of the tweeter and horn.
10 x 6", 90 x 60° Tractrix Horn
The 10 x 6", 90 x 60° Tractrix horn helps raise the efficiency of the 1" titanium-dome compression tweeter, optimizing its radiation pattern. The horn is designed to enable the speaker to meet THX Ultra2 directivity specifications without the lobing and comb filtering effects of multi-tweeter options. Its dual 6.5" woofers are designed with large, magnetically shielded motor structures that drive rigid, low-mass Cerametallic anodized-aluminum cones for high output with low distortion.
Rabbet and Dado Construction
The speaker features a rabbet and dado locked panel construction design to help ensure sonic purity, consistency, and reliability.
Klipsch THX-6000-LCR Specs
Speaker System
| Speaker Configuration | 2-Way |
| Power Handling | 150 W RMS 600 W Peak |
| Bi-Amp Capability | Yes |
| Drivers | 2 x 6.5" / 165.1 mm Cerametallic Cone Woofer 1" / 25.4 mm Titanium Dome Tweeter |
| Enclosure Type | Bass-Reflex |
| Ports | 1 x Front-Firing |
| Frequency Response | 48 Hz to 20 kHz (±3 dB) |
| Impedance | 8 Ohms |
| Magnetic Shielding | Yes |
| Wired Connectivity | 2 x Binding Post Pair Input |
| Crossover | 1400 Hz |
| Sensitivity | 97 dB |
Physical
| Placement & Mounting Options | Tabletop/Bookshelf Ceiling-Mount, Wall-Mount (with Optional Hardware) |
| Cabinet Material | MDF |
| Dimensions | 17 x 15 x 12.5" / 43.2 x 38.1 x 31.8 cm (with Grille) |
| Weight | 39.0 lb / 17.7 kg |
1 Year Parts & Labor Manufacture Warranty
