Atlona Conferencing Switcher for HDMI and VGA with Ethernet-Enabled HDBaseT Output – 3x1
The AT-HDVS-150-TX is a 3×1 switcher and HDBaseT transmitter with two HDMI inputs and a VGA input with audio. Video signals up to 1080p, plus embedded audio, can be transmitted up to 230 feet (70 meters). The HDVS-150-TX is designed for use with the AT-HDVS-150-RX receiver and HD scaler, and can serve as the central component of a compact, automated AV system with the convenience of automatic input selection and display control. The switcher is remotely powered by the HDVS-150-RX through Power over Ethernet (PoE).
3×1 HDBaseT Switcher
This 3x1 switcher features two HDMI inputs plus a VGA input with audio. It allows advanced HDMI display devices to be used with legacy VGA sources. Please note: audio signals will not pass without an accompanying video signal.
Designed For Point-to-Point Extension
When used with the AT-HDVS-150-RX HD scaling receiver, this switcher extends AV up to 230 feet (70 meters) @ 1080p or 1920×1200, providing a compact, automated AV system that’s cost-effective, plus the convenience of automatic input selection and display control.
Long Distance HDMI Extension
Using a CAT6a/7 cable, this switcher transmits AV signals @ 4K UHD up to 130 feet (40 meters) when used with a compatible HDBaseT receiver. You can also transmit up to 230 feet (70 meters) @ 1080p. Atlona uses easy-to-integrate category cables for a low-cost, reliable system installation.
Remotely Powered Via PoE
This transmitter is an IEEE 802.3af PoE Powered Device (PD), and its power is supplied by AT-HDVS-150-RX over HDBaseT, so you don’t have to worry about connecting it to another power source.
Automatic Input Selecting Using HPD
The HDVS-150-TX automatically selects an input source based on detection of the 5 volt hot plug detect (HPD) signal, or if there’s a change in display status. This enables simplified, automatic system operation with no user intervention necessary.
Automatic Display Control
Used in conjunction with the HDVS-150-RX receiver, the HDVS-150-TX can provide control to a display through RS-232, without the need for a separate control system. This simplifies system design and integration while reducing costs. Trigger a display to power on automatically whenever a laptop or other device is connected. When the laptop is disconnected, the switcher forces the display to power off. A power button on the front panel can be used for manual on/off control of the display. Please note: automatic display control is available only when connected to the HDVS-150-RX receiver.
